Notices
Engine & Drivetrain VQ Power and Delivery

Need pic of injector housing (diagnose ticking sound)

Thread Tools
 
Search this Thread
 
Old Jan 15, 2007 | 01:45 PM
  #1  
jjulich's Avatar
jjulich
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 36
Likes: 0
From: Dallas
Default Need pic of injector housing (diagnose ticking sound)

I am trying to diagnose a ticking sound at idle coming from the driver's side of my engine when it gets hot (Oil Pressure goes below 1/4 of range). I have been told to put a screwdriver up to the injector housing to see if it is the injectors, but I don't know what this looks like. Does anyone have a picture of the injector housing or where i should listen to? I am very open to suggestions.

Thanks,
Jeff
Reply
Old Jan 15, 2007 | 02:50 PM
  #2  
Q45tech's Avatar
Q45tech
Registered User
 
Joined: Oct 2003
Posts: 984
Likes: 0
From: Marietta, Georgia
Default

A better device is a technican's mechanical probe stethoscope.

Probably worn shims on bucket lifters unless you have been running ethanolized fuel which tends to wear the injectors a tiny bit faster.
Reply
Old Jan 17, 2007 | 06:32 AM
  #3  
jjulich's Avatar
jjulich
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 36
Likes: 0
From: Dallas
Default

The car only has 3k miles on it. I don't think that anything would be worn, but there could be a defect. I have been running a small % of ethanol. Also, the sound only comes out when it is warmer outside and the engine is hot.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Obadabot
Maintenance & Repair
16
Jun 18, 2023 11:31 PM
MM'08_350Z
VQ35HR
225
Apr 22, 2021 09:42 PM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM




All times are GMT -8. The time now is 08:48 AM.