injector sizing wrong?
Thread Starter
Registered User
iTrader: (85)
Joined: Sep 2006
Posts: 6,662
Likes: 2
From: Scottsdale AZ
injector sizing wrong?
a while ago i ordered a set of supposedly "used rc 440cc injectors" (b4 i got the greddy tt kit) and i was looking at the calibration report and it says
injector static flow rate, in C.C. of fuel per / minute
after cleaning
inj. #
cc/min: pattern
1 749.0 excellent
2 750.0 excellent
3 750.0 excellent
4 749.0 excellent
5 751.0 excellent
6 750.0 excellent
high: 751 low: 749 avg: 749.8
does this mean they are really 750 cc injectors? it makes sense if they were becus the report mentions nothing of 440 wutsoever, even the code says RC# SL4-750. can anybody help me out?
tried scanning it, wouldnt scan, srry, us greeks r technologically retarded, were used 2 carving in stone lol
injector static flow rate, in C.C. of fuel per / minute
after cleaning
inj. #
cc/min: pattern
1 749.0 excellent
2 750.0 excellent
3 750.0 excellent
4 749.0 excellent
5 751.0 excellent
6 750.0 excellent
high: 751 low: 749 avg: 749.8
does this mean they are really 750 cc injectors? it makes sense if they were becus the report mentions nothing of 440 wutsoever, even the code says RC# SL4-750. can anybody help me out?
tried scanning it, wouldnt scan, srry, us greeks r technologically retarded, were used 2 carving in stone lol
Last edited by bbs350z; Feb 2, 2007 at 09:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM