Dynoed my car (revup with cams)
#101
Registered User
iTrader: (1)
Join Date: Jun 2006
Location: Houston, TX
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dukeduster
About the dyno reading lower or higher I dunno, I am just going by what the guy at hp performance said. he did input the numbers so he should know its his dyno. I don't know much about dynos and I never said i did. but i do know how an engine works and advanced principles of internal combustion engines.
Congrats! You just proved that you know how an internal combustion engine works. I think you and rocks should start a DIY thread on how to custom fabricate an engine block out of JB weld and silly putty.
Then you should pick up the latest issue of Mustang 5.0 (?) there's a guy in there that built a turbo system for his 'stang using a John Deere turbo off a broken down tractor behind his barn. You should find it a good read.
#105
Registered User
iTrader: (2)
Join Date: Jan 2005
Location: Whorelando
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
yea this is a terrible dyno. My stock revup dyno looked a little better lol. Get that thing tuned and use better gas . I think the compression is the key here , obviously its way to low for NA use to get anything out of it. I guess the nismo cams would have to be the NA descion there the only ones i seen to make power. But in your case its the compression that maybey nulling all hope for the cams.
#107
My350z
iTrader: (48)
Originally Posted by dukeduster
86 octane is pretty ****ty I agree on that. but why would you say those are bad numbers on a low reading dyno with 86 octane UNTUNED?
guys, do you understand what you are doing/saying, you are posting up a dyno graph and making tons of excuses for it, this is why everyone has a problem with it. if you want to post up a dyno graph, go to a dynojet and put down some halfway respectable numbers AFTER your tune so people will see your point.
with no pre dyno graph, its kinda pointless, plus the dyno doesnt need to be loaded on a NA car to get higher numbers. it would read lower numbers if it was loaded properly. this load WILL in return get your turbo car to make more boost like it is designed to do.
im sure todds motor is top notch, but the dyno graph here with all the excuses on why it should read higher is not really doing any justice..
plus the difference in octane prices will be about 20 cents a gallon, on a full tank fill up, well thats under 4 dollars. just put 93 in it please, its better burning/ cleaner gas...
#108
Registered User
iTrader: (2)
Join Date: Jan 2005
Location: Whorelando
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
Werd, i think just clear mind and some honest tuning you will make better results this was indeed probably not expected. So the flames from the public will come . But hey thats not saying you cant make more power. Just you probably havent harnessed it properly yet . Well from the dyno its obvious.
#109
Registered User
iTrader: (1)
Join Date: Sep 2002
Location: Boynton Bch FL
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Rocks go to a different dyno the guy doesn't know how to set up a mustang dyno. If he had a problem with it he should never have run your car. Please put in high test like your supposed to that is the way the car was designed. Read your owners manuel. See recomended fuel section.
#111
With it fully tuned it should make 5-10whp less than a than a stock compression revup, with the same mods. Sure ill let you borrow them if you take them out and put in new valvetrain for me so i dont have to do it this summer. I should of got something better than the jwt stuff.
#112
Registered User
iTrader: (61)
Originally Posted by rocks
With it fully tuned it should make 5-10whp less than a than a stock compression revup, with the same mods. Sure ill let you borrow them if you take them out and put in new valvetrain for me so i dont have to do it this summer. I should of got something better than the jwt stuff.
Nobody else makes cams for the REVUP's.
#115
Cranky FI Owner
iTrader: (14)
Originally Posted by rocks
With it fully tuned it should make 5-10whp less than a than a stock compression revup, with the same mods. Sure ill let you borrow them if you take them out and put in new valvetrain for me so i dont have to do it this summer. I should of got something better than the jwt stuff.
Bottom line:you have a low compression FI block, it wont be impressive in any way NA-stop kidding yourself
#117
New Member
iTrader: (5)
Originally Posted by rocks
With it fully tuned it should make 5-10whp less than a than a stock compression revup, with the same mods. Sure ill let you borrow them if you take them out and put in new valvetrain for me so i dont have to do it this summer. I should of got something better than the jwt stuff.
#119
Registered User
iTrader: (5)
Join Date: Mar 2006
Location: NoVA
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
Probably the best way to describe this thread...
"What you've just said is one of the most insanely idiotic things I have ever heard. At no point in your rambling, incoherent response were you even close to anything that could be considered a rational thought. Everyone in this room is now dumber for having listened to it. I award you no points, and may God have mercy on your soul."
"What you've just said is one of the most insanely idiotic things I have ever heard. At no point in your rambling, incoherent response were you even close to anything that could be considered a rational thought. Everyone in this room is now dumber for having listened to it. I award you no points, and may God have mercy on your soul."
#120
Registered User
Join Date: Oct 2006
Location: Lovington, nm
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by S1AMEZE
Probably the best way to describe this thread...
"What you've just said is one of the most insanely idiotic things I have ever heard. At no point in your rambling, incoherent response were you even close to anything that could be considered a rational thought. Everyone in this room is now dumber for having listened to it. I award you no points, and may God have mercy on your soul."
"What you've just said is one of the most insanely idiotic things I have ever heard. At no point in your rambling, incoherent response were you even close to anything that could be considered a rational thought. Everyone in this room is now dumber for having listened to it. I award you no points, and may God have mercy on your soul."
Do you learn everything from adam sandler movies? loser