I know the stock clutches held a decent amount of power and was nice to drive on..... I seem to recall that this was a viable option for replacement, possibly mated to the same JWT Flywheel part# as well.

I've looked for the thread/article I had read and can't seem to find it. I know the offereings for the 350z have come along way, so this may have only been something done in the early 2002-2004 periods. I believe the Z32 TT clutch could be had for around $350, granted I don't know how would work on the FI 350z's.


any insight is appreciated.

 

They dont fit and its just a stock clutch anyways. If your looking for a clutch get a decent aftermarket. I installed the ORC 409 metal clutch, but choose one that is suited for your driving/hp Mine is good up to 400hp and Im putting 380 to the tires.

 

Yes the Z32 clutches work...but ONLY if you have a JWT flywheel. The JWT flywheel has bolt holes for both the Z32 and Z33 clutches. I have a Z32 RPS 6-puck clutch on my car now mated to my JWT flywheel. SGP sells the combo here since RPS doesn't make a 350Z clutch (or at least didn't when I bought mine).

http://sgpracing-store.stores.yahoo....flmaxclco.html