Well my car shipped out today!!!
Thread Starter
Registered User
iTrader: (10)
Joined: Dec 2003
Posts: 2,704
Likes: 0
From: one of the 5 boros, NY
I shot him an instant message...and he said today...
so let's keep our finger's crossed....(noah has not seen pics either so I am just as excited as you are)
so let's keep our finger's crossed....(noah has not seen pics either so I am just as excited as you are)
Originally Posted by NoahzBurnt
I shot him an instant message...and he said today...
so let's keep our finger's crossed....(noah has not seen pics either so I am just as excited as you are)
so let's keep our finger's crossed....(noah has not seen pics either so I am just as excited as you are)
Noah, How you getting the car to Vegas?
Originally Posted by NoahzBurnt
They are shipping it for me......btw anybody need brembos?!?
There is always a need for brembos at my house - the question is more how much do you need the money ( meaning price).
Originally Posted by NoahzBurnt
Badly but not bad enough that I am going to sit on them for a few months to make $200
BTW, you are my hero for pioneering this swap if I didn't mention it before.
Thread Starter
Registered User
iTrader: (10)
Joined: Dec 2003
Posts: 2,704
Likes: 0
From: one of the 5 boros, NY
I have a post in the classifieds with pictures and what I would LIKE to get for them being i just put new rotors, lines and pads on less than 100 miles ago....
But shoot me an offer and we can go from there...
well thnk you...i am glad my 7 months of agony have made other people happy!
But shoot me an offer and we can go from there...
well thnk you...i am glad my 7 months of agony have made other people happy!
I am interested in this swap, so I emailed Brian....here is the response that I just received:
We appreciate the email. We are excited about this new product, and we feel the completed car will be something many people will want to have.
We will be posting in that thread later today. The LS2 engine will be in the car and installed for the final time. We strive for full customer service satisfaction with every project. We just received the green light from Noah two weeks ago. We're building this car for him at a discount and within three weeks. If that isn't top-notch service, I'm at a loss for what else could be done.
Thanks for the update. We're looking forward to working with the 350Z community.
Brian Hinson
HinsonSuperCars.com
We will be posting in that thread later today. The LS2 engine will be in the car and installed for the final time. We strive for full customer service satisfaction with every project. We just received the green light from Noah two weeks ago. We're building this car for him at a discount and within three weeks. If that isn't top-notch service, I'm at a loss for what else could be done.
Thanks for the update. We're looking forward to working with the 350Z community.
Brian Hinson
HinsonSuperCars.com
Thread Starter
Registered User
iTrader: (10)
Joined: Dec 2003
Posts: 2,704
Likes: 0
From: one of the 5 boros, NY
Originally Posted by JCat
I am interested in this swap, so I emailed Brian....here is the response that I just received:
[/SIZE]
[/SIZE]
Brain has been a great help. I believe the green light he refers to is the usage of an LS2 due to lack of pistons being available in the time frame I need. I am hoping to get pics/vids from him soon. But as far as I can remember this has taken just a little longer than 2 weeks.
Thread Starter
Registered User
iTrader: (10)
Joined: Dec 2003
Posts: 2,704
Likes: 0
From: one of the 5 boros, NY
Last I have spoken to him...NO...is there a chance...YES
I am out of time...out of $ and out of anti-anxiety medication....
I can't wait til this is done and back in the garage.
I am out of time...out of $ and out of anti-anxiety medication....
I can't wait til this is done and back in the garage.
Screw the garage!
You need to spank that thing out on the road course and drag strip.
Dont turn it into a cherry ride you can't take out on the street. I know you gotta be bummed with the cost overruns but it would be a shame to come this far to only park it.
You need to spank that thing out on the road course and drag strip. Dont turn it into a cherry ride you can't take out on the street. I know you gotta be bummed with the cost overruns but it would be a shame to come this far to only park it.
Registered User
Joined: Oct 2007
Posts: 13
Likes: 0
From: HinsonSuperCars.com
HinsonSuperCars.com - LSX 350Z Build
As stated in an earlier email posted above, we recently received the green light from Noah to build the car with an LS2. After months of waiting on parts to be developed and/or donated, we finally made the call to install an engine that we had in inventory. The engine going in the car is a low mileage '06 LS2 engine with a six speed transmission.
This is the clean and empty engine bay of the 350Z.
Noah's new brakes.
LS2 Installed.
Custom 2" primary headers are being made for the future big displacement engine installation. Our production run of headers will have either 1.75" or 1.875" primaries.
Close up on SS headers.
The car is scheduled to be road tested on Thursday and ready that night or early Friday. We'll progress pictures of the car through the week as we have time. This is a tight deadline which we hope to make.
Noah, I believe you are planning on starting a new thread soon. Feel free to copy this in to it. Send me a link and I'll keep it updated.
HinsonSuperCars.com
sales@hinsonsupercars.com
205-267-6387
This is the clean and empty engine bay of the 350Z.
Noah's new brakes.
LS2 Installed.
Custom 2" primary headers are being made for the future big displacement engine installation. Our production run of headers will have either 1.75" or 1.875" primaries.
Close up on SS headers.
The car is scheduled to be road tested on Thursday and ready that night or early Friday. We'll progress pictures of the car through the week as we have time. This is a tight deadline which we hope to make.
Noah, I believe you are planning on starting a new thread soon. Feel free to copy this in to it. Send me a link and I'll keep it updated.
HinsonSuperCars.com
sales@hinsonsupercars.com
205-267-6387
Originally Posted by brianhinson
As stated in an earlier email posted above, we recently received the green light from Noah to build the car with an LS2. After months of waiting on parts to be developed and/or donated, we finally made the call to install an engine that we had in inventory. The engine going in the car is a low mileage '06 LS2 engine with a six speed transmission.
This is the clean and empty engine bay of the 350Z.
Noah's new brakes.
LS2 Installed.
Custom 2" primary headers are being made for the future big displacement engine installation. Our production run of headers will have either 1.75" or 1.875" primaries.
Close up on SS headers.
The car is scheduled to be road tested on Thursday and ready that night or early Friday. We'll progress pictures of the car through the week as we have time. This is a tight deadline which we hope to make.
Noah, I believe you are planning on starting a new thread soon. Feel free to copy this in to it. Send me a link and I'll keep it updated.
HinsonSuperCars.com
sales@hinsonsupercars.com
205-267-6387
This is the clean and empty engine bay of the 350Z.
Noah's new brakes.
LS2 Installed.
Custom 2" primary headers are being made for the future big displacement engine installation. Our production run of headers will have either 1.75" or 1.875" primaries.
Close up on SS headers.
The car is scheduled to be road tested on Thursday and ready that night or early Friday. We'll progress pictures of the car through the week as we have time. This is a tight deadline which we hope to make.
Noah, I believe you are planning on starting a new thread soon. Feel free to copy this in to it. Send me a link and I'll keep it updated.
HinsonSuperCars.com
sales@hinsonsupercars.com
205-267-6387
BAD ***!!!
More pics please
Thread
Thread Starter
Forum
Replies
Last Post