DanielW

iTrader: (27)

hey guys,

I ordered a UR underdrive crank pulley from stillen and i was looking at the belts but they say that the belts are for underdrive pulley SETS. Will these belts work for just the crank pulley or do i need to get a special size? or will the stock ones still work? Any input would be greatly appreciated.


Thanks,

Daniel

blueper4mancez

iTrader: (25)

the stock ones would not work . you need to get gates' belts stillen should have them .

MUZZY

iTrader: (28)

napa has them too $30

DanielW

iTrader: (27)

cool. The only ones stillen carries are these:
http://www.stillen.com/product.asp?id=STIUDBELT01&c=PE

Those are the ones that say they're for the underdrive SET. What about these gates belts? is there a certain size or model that i would need? dorry for all the ?'s but i don't know much about belts and pulleys

DanielW

iTrader: (27)

what about the ones on mynismo.com?

Z CRUZN

Get the ones you mentioned for the set - the only pulley that changes sizes on the UR set is the crank pulley. The mynismo.com set will work fine.

Or pick them up at your local parts store:
Gates #K060445 (alt, p/s, water pump belt)
Gates #K040353 (a/c belt)

DanielW

iTrader: (27)

thanx dude

Z1 Performance

iTrader: (564)

or just save yourself a hassle, as we sell the pulley and belts as a combo

http://www.z1auto.com/prodmore.asp?m...ine&prodid=718

blueper4mancez

iTrader: (25)

^^^^ that's where i got mine from . fast shipping too .