Attached is a picture of what I am talking about. The two parts on the picture that are circled are a sensor and a water outlet for a bypass hose. If you can see in the picture, they are sticking straight out horizontally. I need to find a coolant pipe for a VQ35 that has these two parts sticking straight up vertically. This coolant pipe wraps right around the back of the motor. I need this so I can move the motor back another couple of inches so I can get the motor behind the front crossmember in my 260z. So if anyone caould look at their Z, whatever year from 02-07, and let me know if their sensor and water outlet are sticking up that would be a great help, because the dealerships are not able to help me with this issue. Thanks guys or girls.

 

look here http://www.courtesyparts.com/betasit...th=714_715_716

and here http://www.courtesyparts.com/betasit...th=714_715_736

 

OMG ! tis will be fast !

 

Very impressive! Best of luck with you build! BTW - Did you also swap out the tranny/ drivetrain?