Tomei 268 cams - stock valve spring cant handle?
Originally Posted by rednezz
Sharif, so in your opinion what kind of power can be expected with the Tomei cams and 11:1 compression?
Originally Posted by Sharif@Forged
Glad to hear things are going well so far. When is that thing going to be FI!! 
I too, was surprised with the power your engine made NA, even with 8.5:1 CR
I too, was surprised with the power your engine made NA, even with 8.5:1 CR
Registered User
Joined: Oct 2006
Posts: 33
Likes: 0
From: atlanta
doesn't it matter which year the car is??
the HR motor has different springs than the previous years right? i believe a progressive spring rate that revs to 7500..... wouldn't this year be able to handle the tomei cams without changing the springs/retainers?
or are the cams completely different?
in anycase, wouldn't the hr springs/retainers fit into the older vq model 350z?
the HR motor has different springs than the previous years right? i believe a progressive spring rate that revs to 7500..... wouldn't this year be able to handle the tomei cams without changing the springs/retainers?
or are the cams completely different?
in anycase, wouldn't the hr springs/retainers fit into the older vq model 350z?
Originally Posted by andyman4lyfee
doesn't it matter which year the car is??
the HR motor has different springs than the previous years right? i believe a progressive spring rate that revs to 7500..... wouldn't this year be able to handle the tomei cams without changing the springs/retainers?
or are the cams completely different?
in anycase, wouldn't the hr springs/retainers fit into the older vq model 350z?
the HR motor has different springs than the previous years right? i believe a progressive spring rate that revs to 7500..... wouldn't this year be able to handle the tomei cams without changing the springs/retainers?
or are the cams completely different?
in anycase, wouldn't the hr springs/retainers fit into the older vq model 350z?
Back from the dead! It seems Tomei only do a 264 (not 268) cam for the revup as far as "mild" cams go and they state that you don't need to change the springs or anything else for these, there just direct drop-ins.
Anyone have good experiences with these cams?
Anyone have good experiences with these cams?
Last edited by ReV2Red; Jul 2, 2011 at 12:29 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
