ARC Oil Cooler install problem
#1
Registered User
Thread Starter
iTrader: (9)
Join Date: Oct 2007
Location: Honolulu
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
ARC Oil Cooler install problem
Hi Guys,
I tried to install the ARC Oil Cooler this weekend. I picked it up second hand from Cesar Torres but he had never installed it.
I ran into a problem installing the oil filter relocater in the attached pic. The assembly is there but the threaded part in the yellow circle is missing. Is that something I am suppose to get from somewhere else or is it a piece that should have been included that I was shorted. If so does anyone have any idea where I can get it? Is it something I will have to order from ARC?
I tried to install the ARC Oil Cooler this weekend. I picked it up second hand from Cesar Torres but he had never installed it.
I ran into a problem installing the oil filter relocater in the attached pic. The assembly is there but the threaded part in the yellow circle is missing. Is that something I am suppose to get from somewhere else or is it a piece that should have been included that I was shorted. If so does anyone have any idea where I can get it? Is it something I will have to order from ARC?
#2
Administrator
iTrader: (25)
Hi,
The answer to your question is yes. The threaded part is suppose to come with the kit. I would contact the seller and ask him where it is at. Good luck ordering it from ARC if you do. I do not know what their policy is or even if they sell it separate.
Val
The answer to your question is yes. The threaded part is suppose to come with the kit. I would contact the seller and ask him where it is at. Good luck ordering it from ARC if you do. I do not know what their policy is or even if they sell it separate.
Val
#3
Registered User
Thread Starter
iTrader: (9)
Join Date: Oct 2007
Location: Honolulu
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
dang thats what I was afraid of. Cesar Torres doesn't seem to be active on this site anymore since he sold his Z. I've tried what contact info I had for him but it isn't looking good.
Maybe one of the vendors here can help me out.
Maybe one of the vendors here can help me out.
#4
Administrator
iTrader: (25)
Originally Posted by dj.kickz
dang thats what I was afraid of. Cesar Torres doesn't seem to be active on this site anymore since he sold his Z. I've tried what contact info I had for him but it isn't looking good.
Maybe one of the vendors here can help me out.
Maybe one of the vendors here can help me out.
#5
Administrator
iTrader: (25)
On second thought, you might be able to buy that center part from another manufacturer. Just make sure it's threaded the same...
#7
Administrator
iTrader: (25)
Originally Posted by str8dum1
www.glowshift.com will sell you that piece for like 15$
http://www.glowshiftdirect.com/index...TS&Category=37
Trending Topics
#8
Registered User
Thread Starter
iTrader: (9)
Join Date: Oct 2007
Location: Honolulu
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
omg thank you, you two are life savers! I can just measure the stock oil filter thread to find out what thread i need for here right? Or does anyone know which one I need off hand?
#11
Administrator
iTrader: (25)
Updates?
#13
Registered User
Thread Starter
iTrader: (9)
Join Date: Oct 2007
Location: Honolulu
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
nice I was waiting for the weekend to measure and make sure it is a 20x1.5 but since everyone agrees I'm gonna go ahead and order it. Can't wait to get my oil cooler hooked up.
#14
Administrator
iTrader: (25)
Originally Posted by dj.kickz
nice I was waiting for the weekend to measure and make sure it is a 20x1.5 but since everyone agrees I'm gonna go ahead and order it. Can't wait to get my oil cooler hooked up.
#15
Administrator
iTrader: (25)
updates?
#16
Registered User
Thread Starter
iTrader: (9)
Join Date: Oct 2007
Location: Honolulu
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
so its definitely been a while since I posted this thread but I just wanted to update everyone that I finally got the oil cooler hooked up and working great. I ordered from racepartswholesale and glowshift but neither were what I needed. I was about to have a machine shop custom make the part I needed for $200+ (for a stupid fitting) when my friend found almost the exact part we needed from a local store called HydroAir Hawaii that makes mostly plumbing parts for $4. Installed it about a month ago and its worked great ever since. Believe me though I kept a very close eye on my Oil Preasure for the first few weeks driving it, especially the first time on the freeway. Seems like everything eventually worked out great. Thanks everyone for all you're help!
Thread
Thread Starter
Forum
Replies
Last Post