hi everyone, im working on installing an oil temp gauge, but the adapter i got that goes on the oil filter does not fit does anyone by chance know the what the thread pitch for our oil filter is?

 

How ironic, just called z1performance and sending back their oil filter block adaptor. The nut does not fit. Package says for nissan/toyota M-19P1.5 but certainly won't fit a 350Z. Don't know the pitch but what a pain finding this out after getting the cover off and the filter removed thinking what an easy task especially when I asked for one to fit my specific application. I Understand Greddy makes one but can't find any info yet.... Good luck

 

20*1.5mm
My Adapter

 

z1 sells the greddy block adaptor...

 

Are you talking about Z1 performance or Z1 motorsports. Z1 performance is the place that sent the wrong one even though the package states M-19 P1.5 Nissan/Toyota but I see posted above the pitch is apparently M-20 P1.5. The package shows that number is for Honda/Mitsubishi/Subaru. This looks just like the one from E-bay. Thanks for the info`above, I'm ordering the one from summit (perma cool 186)

 

I had a Mocal, but the fawker cracked on me while we were installing. Didn't feel like dishing out another $100, so I went with the PermaCool. Works GREAT!

 

SUCCESS: Thanks to Adam at Z1 performance for his help in getting the correct adaptor sent to me. Through no fault of his own, the package was not correct in its identification as far as the 350Z thread pitch is concerned. Installed the new adaptor and happy once again......