Finally dynoed my car.
10-05-2008, 08:06 AM
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: Florida
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Finally dynoed my car.
My car is a 03 6spd with:
Jwt popcharger
motordyne 5/16 iso thermal spacer
hondata manifold gasket
jic single exhaust
So I dynoed my car a couple weeks ago and put down 245 I thought it seemed low for my mods. So I went to change my plugs the other day and get oil on three of the 6 plugs. The seals on the tube caps are garbage. I called courtesy nissan to see if you could just but the seals but of course not. You have to buy new valve covers which are like 500 for both. But the guy at courtesy told me they just rtv them and there good to go. So on that advice I rtv them and new valve cover gaskets and slaped it all back together with new plugs and put it back on the dyno. So after all that I gained 12 more hp for a total of 257.66. My car feels like a million bucks now. Next up is test pipes and another dyno run. Thanks courtesy nissan!
Jwt popcharger
motordyne 5/16 iso thermal spacer
hondata manifold gasket
jic single exhaust
So I dynoed my car a couple weeks ago and put down 245 I thought it seemed low for my mods. So I went to change my plugs the other day and get oil on three of the 6 plugs. The seals on the tube caps are garbage. I called courtesy nissan to see if you could just but the seals but of course not. You have to buy new valve covers which are like 500 for both. But the guy at courtesy told me they just rtv them and there good to go. So on that advice I rtv them and new valve cover gaskets and slaped it all back together with new plugs and put it back on the dyno. So after all that I gained 12 more hp for a total of 257.66. My car feels like a million bucks now. Next up is test pipes and another dyno run. Thanks courtesy nissan!
10-05-2008, 08:41 AM
#2
Registered User
Join Date: Aug 2008
Location: Malaysia
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
My car is a 03 6spd with:
Jwt popcharger
motordyne 5/16 iso thermal spacer
hondata manifold gasket
jic single exhaust
So I dynoed my car a couple weeks ago and put down 245 I thought it seemed low for my mods. So I went to change my plugs the other day and get oil on three of the 6 plugs. The seals on the tube caps are garbage. I called courtesy nissan to see if you could just but the seals but of course not. You have to buy new valve covers which are like 500 for both. But the guy at courtesy told me they just rtv them and there good to go. So on that advice I rtv them and new valve cover gaskets and slaped it all back together with new plugs and put it back on the dyno. So after all that I gained 12 more hp for a total of 257.66. My car feels like a million bucks now. Next up is test pipes and another dyno run. Thanks courtesy nissan!
Jwt popcharger
motordyne 5/16 iso thermal spacer
hondata manifold gasket
jic single exhaust
So I dynoed my car a couple weeks ago and put down 245 I thought it seemed low for my mods. So I went to change my plugs the other day and get oil on three of the 6 plugs. The seals on the tube caps are garbage. I called courtesy nissan to see if you could just but the seals but of course not. You have to buy new valve covers which are like 500 for both. But the guy at courtesy told me they just rtv them and there good to go. So on that advice I rtv them and new valve cover gaskets and slaped it all back together with new plugs and put it back on the dyno. So after all that I gained 12 more hp for a total of 257.66. My car feels like a million bucks now. Next up is test pipes and another dyno run. Thanks courtesy nissan!
10-05-2008, 09:10 AM
#4
Registered User
Join Date: Aug 2008
Location: Malaysia
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post