First Dyno of my Car. Good results
10-05-2003, 08:05 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Austin, TX
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
First Dyno of my Car. Good results
I went to the S2000 car meet this morning in Austin Texas at MZM to get the car dyno'ed. Well I am pleased with the results, the car has a borla and a injen CAI and that's all the performance mods and it put down 257.5HP @ 6250 RPM and 245.1TQ at 4750 RPM.
Dyno Print out:
Dyno Print out:
10-05-2003, 11:24 PM
#5
New Member
iTrader: (6)
Join Date: May 2002
Location: san luis obispo, ca
Posts: 1,580
Likes: 0
Received 0 Likes
on
0 Posts
Re: First Dyno of my Car. Good results
Originally posted by dmazyn
the car has a borla and a injen CAI and that's all the performance mods and it put down 257.5HP @ 6250 RPM and 245.1TQ at 4750 RPM.
the car has a borla and a injen CAI and that's all the performance mods and it put down 257.5HP @ 6250 RPM and 245.1TQ at 4750 RPM.
Wowsers! Looks like you got yourself a strong engine.
Out of curiosity, what brand of dyno was it, and what gear did you test in? Just wondering how it compares to other dynos around here.
Trending Topics
10-06-2003, 06:22 AM
#9
Registered User
Originally posted by dmazyn
It was a Mustang Dynamometer running in 5th.
It was a Mustang Dynamometer running in 5th.
Mustang dyno's tend to read about 10 - 15 hp higher than a traditional dynojet.
Nice pull for those mods!
10-06-2003, 09:32 AM
#12
Sponsor
Sport Z Magazine
Sport Z Magazine
Originally posted by dmazyn
It was a Mustang Dynamometer running in 5th.
It was a Mustang Dynamometer running in 5th.
Jeff
10-06-2003, 10:11 AM
#15
Registered User
Join Date: Jul 2002
Location: Charlotte, NC
Posts: 4,052
Likes: 0
Received 0 Likes
on
0 Posts
Isnt this the same type dyno that was used at Mossy Nissan that got such high hp pulls and caused quite a stir in which several people questioned the hp of that dyno?
What I think is important is how much difference each one registers between one set of mods and the next. So what do we have here?
With only a Borla TD and Injen CAI, dmayzn logged 257.5 rwhp on the Mustang Dyno. With pretty much the same set up, I logged right at 245rwhp on a DynoJet and, as I recall, this is typical (well, maybe 1-3rwhp low) for a Z sporting the Borla and CAI. So, the Mustang dyno ran 12.5rwhp higher, or 5.2% higher than the DynoJet.
If we go back to Richard's dyno run of 301rwhp on the Mossy (Mustang) Dyno day and adjust it accordingly (301rwhp / 1.052%), we get a comparable DynoJet rating of 286rwhp.
Ultimately, we want to look at the difference for Richard's Z, so....
Mustang Dyno = 301rwhp - 257.5rwhp = 43.5 rwhp gain
DynoJet Dyno (approx) = 286rwhp - 245 rwhp = 41 rwhp gain
So, either way you slice it, it looks like the mods Richard and Greg did (beyond the Borla exhaust and CAI) are good for about 40-45rwhp...
Add in the Borla and CAI and the whole package is likely good for about 60 rwhp over stock or 360 hp at the crank! WOOHOO
which to me sounds very reasonable! I hope I get that much when I make my changes!
10-06-2003, 12:16 PM
#16
Registered User
Join Date: Aug 2003
Location: Los Gatos, CA
Posts: 1,981
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for being dumb..How much power does a stock Z make at the wheels?
Also, someone else posted that they got 20rwhp form the borla TD exhaust. (just thought I'd mention that)
Also, someone else posted that they got 20rwhp form the borla TD exhaust. (just thought I'd mention that)
10-06-2003, 12:22 PM
#17
Sponsor
Sport Z Magazine
Sport Z Magazine
Most people dyno about 232 to 243rwhp. Temperature, type dyno, and variations in hp from stock Z to Z make up the reasons for the 10 hp difference.
10-06-2003, 07:18 PM
#18
Registered User
Join Date: Jul 2002
Location: Charlotte, NC
Posts: 4,052
Likes: 0
Received 0 Likes
on
0 Posts
Also, someone else posted that they got 20rwhp form the borla TD exhaust. (just thought I'd mention that)
10-06-2003, 09:48 PM
#19
Registered User
Join Date: Aug 2003
Location: Los Gatos, CA
Posts: 1,981
Likes: 0
Received 0 Likes
on
0 Posts
Well, they said "Borla claimes 20 rwhp, lets just say its true!"
They said that because they did not have a chart to scan in to show us. Don't remember who it was who said that.
They said that because they did not have a chart to scan in to show us. Don't remember who it was who said that.
10-07-2003, 06:24 AM
#20
Registered User
Join Date: Jul 2002
Location: Charlotte, NC
Posts: 4,052
Likes: 0
Received 0 Likes
on
0 Posts
They said that because they did not have a chart to scan in to show us. Don't remember who it was who said that.
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM
