running lean
It doesn't change the tune at all, but it just bumps the base timing (which correspondingly will increase the timing above what it is already hard coded in). If at a given rpm you are at 30 degrees and you bumped it +2 via cipher it will now be 32 at that same rpm. At least that is what I had understood. Check with UPREV though. If the cars ecu senses knock it will automatically (under 5k rpms) pull the timing.
Last edited by 03threefiftyz; Aug 25, 2009 at 03:53 PM.
Joined: Mar 2007
Posts: 5,311
Likes: 0
From: Dallas/NewYork/Michigan/Korea
It doesn't change the tune at all, but it just bumps the base timing (which correspondingly will increase the timing above what it is already hard coded in). If at a given rpm you are at 30 degrees and you bumped it +2 via cipher it will now be 32 at that same rpm. At least that is what I had understood. Check with UPREV though. If the car senses knock it will automatically (under 5k rpms) pull the timing back.
Edit: Sorry, i'm kinda slow..
Last edited by Chef-J; Aug 25, 2009 at 03:56 PM.
Joined: Mar 2007
Posts: 5,311
Likes: 0
From: Dallas/NewYork/Michigan/Korea
I saw.......over-reved it huh? My redline is 7000 and I know a few others who push 7200 so you should be fine.
In the my after vid in the below thread it actually pegged 7030rpm according to cipher. My car revs up there in a hurry with the OS set-up.
In the my after vid in the below thread it actually pegged 7030rpm according to cipher. My car revs up there in a hurry with the OS set-up.
Last edited by 03threefiftyz; Aug 25, 2009 at 04:40 PM.
Joined: Mar 2007
Posts: 5,311
Likes: 0
From: Dallas/NewYork/Michigan/Korea
I usualy easy to kept my eyes on boost and rpms when i had utec/HFC. Now it seems rev up fast up at top. Hard to keeping my eyes on both side. Well gotta work on more tho.
thnx guys for trying to get me the part number.. appreciate your help.
tho, an idea just clicked in my head. since Uprev offer an upgrade option for ppl with Cipher only, i can buy that and pull out the part number from my ECU and then upgrade to Osiris.?
i think it's gonna cost me more than the norm, but that's a way of doing it.
another way would be, take my car to our local dealer and have them pulling out the number from my ECU directly.
how does that sound?
tho, an idea just clicked in my head. since Uprev offer an upgrade option for ppl with Cipher only, i can buy that and pull out the part number from my ECU and then upgrade to Osiris.?

i think it's gonna cost me more than the norm, but that's a way of doing it.
another way would be, take my car to our local dealer and have them pulling out the number from my ECU directly.
how does that sound?
Last edited by maXmood; Aug 26, 2009 at 11:17 AM.
Joined: Mar 2007
Posts: 5,311
Likes: 0
From: Dallas/NewYork/Michigan/Korea
Edit: i was talking with jared via email, i just reply him back. I did mention about you, send him an email. If you don't hear from him within few days, i can send him a message or give a call for you.
Last edited by Chef-J; Aug 26, 2009 at 06:08 PM.
I think someone at UpRev was on vacation last week, maybe that is the cause for some delay. I just got my Osiris standard package yesterday
. Not sure on Jared's email - sorry. Try calling?
. Not sure on Jared's email - sorry. Try calling?
Joined: Mar 2007
Posts: 5,311
Likes: 0
From: Dallas/NewYork/Michigan/Korea
Joined: Mar 2007
Posts: 5,311
Likes: 0
From: Dallas/NewYork/Michigan/Korea







