I am trying to gather as much information as I can the following Engine Design Utility: http://www.ozdat.com/ozdatonline/enginedesign/ ...
Now I hope this becomes a "sticky" because this utility has been extremely valuible to the datsun community. I hope we can get the following info:

VQ30DET, VQ33DD, VQ35DE, VQ40DE, VQ35HR

BLOCK:
Number of Cylinders, Deck Height, Bore
Crank:
Stroke, Rod Bearing OD, Rod Thickness
Head:
Combustion Chamber CC, Number of Valves, Intake Valve(s) Diametre, Exhaust Valve(s) Diametre
Rods:
Length, Piston End Bore, Piston End Thickness, Big End Bore, Big End Thickness, Weight
Pistons:
Bore, Pin Height, Pin Diametre, Dish/Dome CC, Weight
Cam:
Intake Valve Lift, Exhaust Valve Lift, Intake Duration, Exhaust Duration, Intake Opens, Exhaust Opens
Other:
Gasket Height, Redline

 

At least we can have all this information in one area/spot.
Please let me know if there are any other engines to add this.

 

Well I see this as funny. That 81 people have looked but not one can provide any infomation or support on a topic that has become very important to many people, including people on this forum?

 

That OZDAT site is Swaeeet!
Would be awesome if you get this thread going and a similar site could be made with the whole VQ series, and maybe throw all of the VH, VK, VG motors in there as well!

 

^^ This is what I am talking about. The web site is amazing and completely helpful in the right hands. Now if we can only get people that have (or currently) torn down motors to take some measurements we would be set. I would love to get all the Nissan motors up there. This way we can really find out what parts are interchangeable.

 

I see so many threads were people are taking about vq40s, vq35des, vq35hr, ect... everyone has an opinion but no-one can be forsure. We have a chance to pull all the VQ information together and put it to use in the above link and I see that people would reather talk about oil plow-by or CELs. Whatever, this is my last time to try and bump this thread, to get people interested. I will get the information, I just dont know if I will share. =(

 

The best place to get this information would be the factory service manuals, in the "EM" (Engine Mechanical) section. Subsection SDS(Service Data and Specifications)

 

are you all the same guy? hmmmmm lol

 

Thank you for your reply it was a b**** to find but thank you.

No I live in Las Vegas Nevada, and do not own a 350z or G.