Best Mods to make car faster?
best bang for the buck right here yall... V8 or V10 power instantly
http://www.youtube.com/watch?v=b9XAC-BvUyo&feature=fvst
http://www.youtube.com/watch?v=b9XAC-BvUyo&feature=fvst
How much does a port and polish cost I might do that? So far I think im going to get:
Tanabe Medallion Touring Exhaust, tanabe y-pipe, helix test pipes
Stillen Intake (maybe get air duct)
Plenum Spacers(Crawford)(motordyne 5/16”)
Spark Plugs(any good brands in particular?)
Cams(any good brands in particular?)
Headers(Should I)
ECU Reflash at the end.
Tanabe Medallion Touring Exhaust, tanabe y-pipe, helix test pipes
Stillen Intake (maybe get air duct)
Plenum Spacers(Crawford)(motordyne 5/16”)
Spark Plugs(any good brands in particular?)
Cams(any good brands in particular?)
Headers(Should I)
ECU Reflash at the end.
Tanabe Y pipe is junk, it cracks test pipes and rattles on the crossmember. If you want to make power , get Motordyne , same goes for exhaust.
JWT popcharger is just fine, and costs less.
Spacer is good, motordyne is my suggestion
Spark plugs, OEM is fine
CAMS JWT is my suggestion
Headers, yes, but a PITA
Tune, will be needed for best results
LOL @ the vid posting...
When speaking about NA gains on these cars, aside from a full olt-on + cams + tune, your not guaranteed IMO a faster car than anbody else.
OP you with all the boltons + tune would likely get beat down the 1320 by a good driver in a stock Z.
I know it sounds cliche but improve the driver then the car. When you can run 13.8 or better stock, then start modding. Otherwise you will be another mod'd Z owner who runs 14's and traps like stock.
When speaking about NA gains on these cars, aside from a full olt-on + cams + tune, your not guaranteed IMO a faster car than anbody else.
OP you with all the boltons + tune would likely get beat down the 1320 by a good driver in a stock Z.
I know it sounds cliche but improve the driver then the car. When you can run 13.8 or better stock, then start modding. Otherwise you will be another mod'd Z owner who runs 14's and traps like stock.
Why do half of you waste your time replying to the thread saying stupid ****. Just don't reply.
Ok so I think i'm going to get:
Tanabe Medallion Touring Exhaust. What y-pipes and test pipes should I get for it?
Stillen Intake + Air Duct. I read on here that the JWT Pop stalls at high speeds and something about it sucking in hot air, so i'll just get stillen if that is true.
Plenum Spacers(motordyne 5/16”)
Ok so I think i'm going to get:
Tanabe Medallion Touring Exhaust. What y-pipes and test pipes should I get for it?
Stillen Intake + Air Duct. I read on here that the JWT Pop stalls at high speeds and something about it sucking in hot air, so i'll just get stillen if that is true.
Plenum Spacers(motordyne 5/16”)
Why do half of you waste your time replying to the thread saying stupid ****. Just don't reply.
Ok so I think i'm going to get:
Tanabe Medallion Touring Exhaust. What y-pipes and test pipes should I get for it?
Stillen Intake + Air Duct. I read on here that the JWT Pop stalls at high speeds and something about it sucking in hot air, so i'll just get stillen if that is true.
Plenum Spacers(motordyne 5/16”)
Ok so I think i'm going to get:
Tanabe Medallion Touring Exhaust. What y-pipes and test pipes should I get for it?
Stillen Intake + Air Duct. I read on here that the JWT Pop stalls at high speeds and something about it sucking in hot air, so i'll just get stillen if that is true.
Plenum Spacers(motordyne 5/16”)
heres the link https://my350z.com/forum/intake-exhaust-334/