Swapping non Revup motor into Revup car
Thread Starter
Registered User
iTrader: (7)
Joined: Jun 2007
Posts: 1,251
Likes: 1
From: Planet Kolob
A guy on g35driver swapped in a Revup into his non Revup car. He said he synced the ignition and Revup ECU but did not say how. I believe dealer did it. I PMed him and asked. http://g35driver.com/forums/engine-d...2-sensors.html
Can I use the Revup ECU and engine harness with a non Revup motor 04+ with wideband sensors? The only connections being different is the VTC connectors? Or they are not different? And finally, can I use Osiris to delete the VVT on the exhaust from the ECU and pass emissions/smog with no SES codes? Will the ECU show Ready status for the emissions test?
According to Injected Performance Revup heads can be used on a non Revup car as long as the exhaust cam sensor is plugged up. I take it the reverse is possible just by disabling the VVT on the exhaust from the ECU? But will it run as a stock car with a Ready status? http://www.injectedperformance.com/i...for350zg35.htm
Can I use the Revup ECU and engine harness with a non Revup motor 04+ with wideband sensors? The only connections being different is the VTC connectors? Or they are not different? And finally, can I use Osiris to delete the VVT on the exhaust from the ECU and pass emissions/smog with no SES codes? Will the ECU show Ready status for the emissions test?
According to Injected Performance Revup heads can be used on a non Revup car as long as the exhaust cam sensor is plugged up. I take it the reverse is possible just by disabling the VVT on the exhaust from the ECU? But will it run as a stock car with a Ready status? http://www.injectedperformance.com/i...for350zg35.htm
Last edited by Andrei; Sep 7, 2011 at 02:42 PM.
Thread Starter
Registered User
iTrader: (7)
Joined: Jun 2007
Posts: 1,251
Likes: 1
From: Planet Kolob
i honestly dont know what to sell it for i would just entertain offers for now its sitting in my warehouse taking up space. I was going to build it and put it in my 03 z but i might just build the 03 motor instead.
i would consider trading for some suspension parts actually as im stock right now or maybe some nice WIDE rims
tein, advan, volk
i would consider trading for some suspension parts actually as im stock right now or maybe some nice WIDE rims
tein, advan, volk
Last edited by ch1215g; Sep 7, 2011 at 03:41 PM.
you would need a new harness and ecu. i did this in my z awhile ago. replace the harness w/ revup one and all cam sensors, and get the 06 ecu and a program from a dealership. imho, i say keep the de.
Thread Starter
Registered User
iTrader: (7)
Joined: Jun 2007
Posts: 1,251
Likes: 1
From: Planet Kolob
03s don't have widebands so I can get an 04 MT ECU with widebands since the 05-06 G sedan non Revup ECU is only for automatics. Don't know if I can plug in a MT ECU from a 350z MT non Revup from a higher year. Better just go with the 04 G sedan MT ECU.
Last edited by Andrei; Sep 7, 2011 at 07:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Vigman
Maintenance & Repair
17
Nov 17, 2015 04:34 AM
SpartanZ32
Zs & Gs For Sale
4
Oct 22, 2015 09:36 AM









