specialist

iTrader: (1)

What is the difference? not worried about power. Rev-up don't have cam sensors in the rear of the head and non rev up do?

terrasmak

iTrader: (8)

That is it , and someone even makes block off plates to use rev up heads on a non rev car.

konrad

iTrader: (15)

Both rev up and non rev up have sensors in the back.
Rev up has 4 sensors in the back and non rev up has 2.
Rev up has Intake and exhaust cam phasing.
Non rev up has only Intake cam phasing.
Rev up has more aggressive cams than Non rev up :
NON rev up : exhaust 240* intake 238*
REV UP: exhaust 248* intake 248*
HR : Exhaust 248* intake 248*

specialist

iTrader: (1)

ok Because i have a set of that i have an don't know what it is from.

It has one hole on each head at the back and when i try to put the sensor in it hits the sensor with the cam. maybe i have the pair of cams in the wrong head.

konrad

iTrader: (15)

if its one hole in the back than its non rev up, take a pic of the sensors and cams , and the sensors hitting the cams

specialist

iTrader: (1)

I am an idiot I mixed up one of the sensors from the tranny they all look the same. I missed labeled the baggie

thanks for your help