Just another 600Z Magnum
#104
Registered User
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: KC
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I'm not toally sure how to respond, but ill say this. I was griding in the back of the pack because I wasn't sure how the car would drive, so I was with slower cars since the first car is the fastest and so on. But I had the 5th fastest time regardless of the class in TT.
#107
Registered User
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: KC
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Not at all. I think I have a sticky brake piston and there is too much rear brake bias. I have a lot of blow by from the valve cover vent, the front sway bar is too close to the oil pan. Its still running a bit rich at wot. The suspension needs to be really dialed in with the weight being shifted around.
#108
Registered User
iTrader: (14)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Not at all. I think I have a sticky brake piston and there is too much rear brake bias. I have a lot of blow by from the valve cover vent, the front sway bar is too close to the oil pan. Its still running a bit rich at wot. The suspension needs to be really dialed in with the weight being shifted around.
#109
Registered User
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: KC
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Yeah I'm not 100% sure either. The valve covers are oem with 1/2" B&B spacers and I've modified the baffles to clear the rockers since the spacers were about an 1/8" shorter that what I really needed. I"m guessing that's part of the issue.
My breather filter is a standard K&N and after the first session it was yellow (oil colored) and there was oil spray everywhere. I made an impromtu catch can and it was fine, but I am getting about 1/2 cup of oil in it after 4-5 laps.
My breather filter is a standard K&N and after the first session it was yellow (oil colored) and there was oil spray everywhere. I made an impromtu catch can and it was fine, but I am getting about 1/2 cup of oil in it after 4-5 laps.
#110
Registered User
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: KC
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I was at Gateway Motorsport Park a while back and had some bad luck. It appears the exhaust valve weld broke and totally destroyed the piston and head. On the plus side I destroyed the previous TT2 record ![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
Here's the carnage:
![Name: IMAG0898_zps28a90237.jpg
Views: 30
Size: 106.9 KB](https://my350z.com/forum/attachments/engine-and-drivetrain/405492d1501528199-just-another-600z-magnum-imag0898_zps28a90237.jpg)
![Name: IMAG0896_zps380c7aed.jpg
Views: 38
Size: 99.4 KB](https://my350z.com/forum/attachments/engine-and-drivetrain/405493d1501528199-just-another-600z-magnum-imag0896_zps380c7aed.jpg)
![Name: IMAG0895_zpse31b50d3.jpg
Views: 35
Size: 158.1 KB](https://my350z.com/forum/attachments/engine-and-drivetrain/405494d1501528199-just-another-600z-magnum-imag0895_zpse31b50d3.jpg)
New LS3 heads are on order along with a piston, valves, dry sump and some other goodies.
I'm also switching to the FR kit so parts of my Sikky kit will be for sale. Stuff like mounts, headers, oil lines and remote kit and possibly the shifter.
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
Here's the carnage:
![Name: IMAG0898_zps28a90237.jpg
Views: 30
Size: 106.9 KB](https://my350z.com/forum/attachments/engine-and-drivetrain/405492d1501528199-just-another-600z-magnum-imag0898_zps28a90237.jpg)
![Name: IMAG0896_zps380c7aed.jpg
Views: 38
Size: 99.4 KB](https://my350z.com/forum/attachments/engine-and-drivetrain/405493d1501528199-just-another-600z-magnum-imag0896_zps380c7aed.jpg)
![Name: IMAG0895_zpse31b50d3.jpg
Views: 35
Size: 158.1 KB](https://my350z.com/forum/attachments/engine-and-drivetrain/405494d1501528199-just-another-600z-magnum-imag0895_zpse31b50d3.jpg)
New LS3 heads are on order along with a piston, valves, dry sump and some other goodies.
I'm also switching to the FR kit so parts of my Sikky kit will be for sale. Stuff like mounts, headers, oil lines and remote kit and possibly the shifter.
Last edited by QTB; 05-14-2014 at 08:13 AM.
#112
Registered User
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: KC
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Yeah I'm waiting on new motor mounts from FR too. I've got a new short block and heads waiting for a cam and lifters right now. I'm making a couple other changes to the car while the motor and trans is out. That being said, I have a sikky kit just laying around if anyone is interested.