Can anyone positively ID these cylinder heads?
#1
Registered User
Thread Starter
iTrader: (8)
Join Date: May 2011
Location: Jersey
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone positively ID these cylinder heads?
I was hoping for some help on identifying these cylinder heads I bought for my Z. I bought them about a year ago off of ebay from a guy with good feedback, and they were advertised as non rev-up DE heads from a 2004 350Z. In the meantime, I sold my Z and these heads have been lying around in my garage. I want to sell them, but since there are a variety of VQ heads out there, I wanted to confirm that they are indeed what I thought I bought. That way someone does not end up getting screwed down the line.
I looked up the casting numbers, but could not confirm anything. Any help is appreciated.
I looked up the casting numbers, but could not confirm anything. Any help is appreciated.
#2
Registered User
iTrader: (4)
def not de heads, the cam position sensor is wrong, its offset on the non revup de heads and 2 per head on rev ups. plus theres no provision for the variable valve solenoids.
its difficult to see the back of the head but looks like theres a hole in the center so mayby vq30 heads out of a maxima? that or hr heads not sure if they have anything that goes in back there sinces supposedly the sensors go into the valve cover according to the fsm.
edit:appears to be hr just missing the housing for camshaft pos sensors. vq30 dont have a hole in the back
its difficult to see the back of the head but looks like theres a hole in the center so mayby vq30 heads out of a maxima? that or hr heads not sure if they have anything that goes in back there sinces supposedly the sensors go into the valve cover according to the fsm.
edit:appears to be hr just missing the housing for camshaft pos sensors. vq30 dont have a hole in the back
Last edited by jerryd87; 02-27-2013 at 09:46 AM.
#3
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Post a pic of the backside of the heads please.
#4
Registered User
Thread Starter
iTrader: (8)
Join Date: May 2011
Location: Jersey
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
I will take a few pics of the rear face of the heads when I get home.
I took a look at some pics of HR heads for sale in the marketplace and at first glance, they do appear to match mine. If they turn out to be HR heads, I might just have to hold on to them, since I might end up with an HR Z sometime in the near future.
I took a look at some pics of HR heads for sale in the marketplace and at first glance, they do appear to match mine. If they turn out to be HR heads, I might just have to hold on to them, since I might end up with an HR Z sometime in the near future.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM