Hey guys I have a 03 auto Thst my motor is beyond repair. . I cane across this Rev up motor. I jumped on it. . Basicly I'm getting mixed answers.
If I use my harness and ecu leave the cam sensors unplugged. Will it run and line up

 

I guess what im asking is. Will my automaric trans bolt up to this rev up motor and will it run without the correct ecu and harness

 

Your going to need that ECU and Harness.

 

Easier to install the rear cam plugs , swap cams and front timing covers from your DE and install it as a DE. No wiring will be needed. Very easy to convert from a rev up to a normal DE

 

If I left the cams in it wouldn't perform correctly? I knew I had to cover the cam sensors..
Im just not ready to play with the timing on this motor.
I dont mind having those front covers exposing un plugged sensors
Or the lack of variable exhaust cam

 

Cars runs like a regular de if u leave front sensors unplugged and the extra exhaust cam sensors u plugged. As expected I dont have variable exhaust timing but it still performs great with no idiot lights on.

 

Right on, I think it would be a great idea for you to create a detailed writ-up on the process and post it in the DIY section of this forum.