Whats up everyone,

I'm starting my vortech build in 2014 but I'm having a really hard time finding an oil adapter plate that will work with my Defi Racer temp and pressure sensors. Does anyone have a line on an oild adapter plate thats 1/8 BSPT?? I tried searching but all I found was his ancient thread: https://my350z.com/forum/2003-2009-n...ich-plate.html
And not much help on the driver forums either

All I can find is 1/8 NPT and I've searched anywhere. Otherwise I'll have to try and locate an untapped but drilled adapter plate that I can tap myself.

Any and all help is appreciated!

 

I don't know of any adapters that have that size but i saw 1/8 bspt to 1/8 npt adapters.

 

where are you getting BSPT from?

Defi says NPT
http://www.defi-shop.com/installation/sensor/

 

The install instructions show "1/8PT" which is referring to BSPT and not NPT

And Supra, I looked at those but im concerned that they will space the sensors too far back for them to get accurate readings :/