What is this hose
05-21-2015, 01:26 PM
#21
New Member
OK- let's start from the beginning. What are you trying to do here? The upper radiator hose is also paired with the lower radiator hose, and if you already pulled THAT, than you mist have already drained the radiator, right? After you get through with reinstalling everything, you will need to properly refiill the radiator so you don't trap air and cause overheating.
05-22-2015, 05:27 AM
#26
If you are not sure how to do these things I WOOD recommend professional help. Fixing cosmetic damage is one thing, but doing this wrong could cause overheating issues etc..
Just read the tree thread. 1) it was hilarious, 2) OP the car looked great in the pic you posted of first getting it (silver). In the pic showing the damage it looks like its time to take it out back and shoot it. And I don't mean because of the accident damage.
Just read the tree thread. 1) it was hilarious, 2) OP the car looked great in the pic you posted of first getting it (silver). In the pic showing the damage it looks like its time to take it out back and shoot it. And I don't mean because of the accident damage.
05-22-2015, 05:54 AM
#27
New Member
05-22-2015, 06:17 AM
#28
General & DIY Moderator
MY350Z.COM
MY350Z.COM
iTrader: (64)
Syner is really trying to do you a good turn by posting that link. There's clearly a lot more to properly bleeding the radiator to prevent overheating. I use a specialized funnel to help get it done effectively. Here's a link to the product:
05-22-2015, 06:41 AM
#29
New Member
Syner is really trying to do you a good turn by posting that link. There's clearly a lot more to properly bleeding the radiator to prevent overheating. I use a specialized funnel to help get it done effectively. Here's a link to the product:
Amazon.com: Lisle 24680 Spill-Free Funnel: Automotive
Amazon.com: Lisle 24680 Spill-Free Funnel: Automotive
http://www.amazon.ca/s/ref=nb_sb_nos...=spill+f%2Caps
Thread
Thread Starter
Forum
Replies
Last Post