2006 rev up engine camshaft positioning sensors

Reply Subscribe

Thread Tools

Search this Thread

Apr 11, 2016 | 06:00 PM

Nick DeBerg

Thread Starter

Registered User

Joined: Apr 2016

Posts: 7

Likes: 0

From: iowa

2006 rev up engine camshaft positioning sensors

are they both straight? or is one angled and one straight

Apr 11, 2016 | 06:02 PM

travlee

Master

iTrader: (8)

Joined: Jul 2011

Posts: 49,725

Likes: 9,296

From: Texas

i think there is one of each

courtesyparts.com

Apr 11, 2016 | 06:52 PM

Nick DeBerg

Thread Starter

Registered User

Joined: Apr 2016

Posts: 7

Likes: 0

From: iowa

Thank you on mine it threw the code i looked it up and both of mine are straight i bought 3 different brands of angled ones but none fit the plug =/only the straight ones fit

Apr 11, 2016 | 08:27 PM

Nick DeBerg

Thread Starter

Registered User

Joined: Apr 2016

Posts: 7

Likes: 0

From: iowa

2006 350z rev up cam shaft DONT BE FOOLED

So after some research i could find no info on my problems. TURNS OUT THERE ARE 4 CAMSHAFT POSITION SENSORS ON THE REV UP MOTOR. anyone else that has a 06 rev up motor care to chime in?

May 11, 2020 | 09:41 PM

Terence Wong

Registered User

Joined: May 2020

Posts: 1

Likes: 0

From: sacramento

Quote:

Originally Posted by Nick DeBerg

So after some research i could find no info on my problems. TURNS OUT THERE ARE 4 CAMSHAFT POSITION SENSORS ON THE REV UP MOTOR. anyone else that has a 06 rev up motor care to chime in?

There are 2 camshaft sensors and 2 exhaust valve timing sensors. 4 all together. On each side one is straight and the other is curved. So 2 straight and 2 curved sensors all together. Still 4 total sensors.