350Z Hard Vibration at Idle, and throughout all gears.
Thread Starter
New Member
Joined: Jan 2022
Posts: 7
Likes: 0
From: LA
350Z Hard Vibration at Idle, and throughout all gears.
Hey guys, was wondering if you have had the experience of having this happen to your automatic 350Z.
vehicle will vibrate harshly in any gear at standstill.
if gas is applied, it will go away temporarily.
can be felt through shifter and vehicle itself. Especially in center console area.
Drives smooth and shifts fine in all gears.
No codes or misfires.
checked oil for any metallic particles and found little to none. (She’s got 171K.)
only thing out of the ordinary she’s got is a poly mount at the bottom of transmission.
vehicle will vibrate harshly in any gear at standstill.
if gas is applied, it will go away temporarily.
can be felt through shifter and vehicle itself. Especially in center console area.
Drives smooth and shifts fine in all gears.
No codes or misfires.
checked oil for any metallic particles and found little to none. (She’s got 171K.)
only thing out of the ordinary she’s got is a poly mount at the bottom of transmission.
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Joined: Oct 2014
Posts: 10,315
Likes: 3,378
From: Northern California
Hey guys, was wondering if you have had the experience of having this happen to your automatic 350Z.
vehicle will vibrate harshly in any gear at standstill.
if gas is applied, it will go away temporarily.
can be felt through shifter and vehicle itself. Especially in center console area.
Drives smooth and shifts fine in all gears.
No codes or misfires.
checked oil for any metallic particles and found little to none. (She’s got 171K.)
only thing out of the ordinary she’s got is a poly mount at the bottom of transmission.
vehicle will vibrate harshly in any gear at standstill.
if gas is applied, it will go away temporarily.
can be felt through shifter and vehicle itself. Especially in center console area.
Drives smooth and shifts fine in all gears.
No codes or misfires.
checked oil for any metallic particles and found little to none. (She’s got 171K.)
only thing out of the ordinary she’s got is a poly mount at the bottom of transmission.
Thread Starter
New Member
Joined: Jan 2022
Posts: 7
Likes: 0
From: LA
I just swapped to the poly in the trans mount.
only thing I’ve haven’t done is the motor mounts.
ive noticed that it happens randomly. I’ve pulled data for O2 sensor and found bank 2 sensor 2 dropping out randomly while driving. No CEL though.
Thread
Thread Starter
Forum
Replies
Last Post