Stroker Kit
#1
Stroker Kit
With the search function being down, I don't know if this has been discussed b4, but I saw this kit from AEBS Racing at the LA SEMA show yesterday.
Trending Topics
#10
Registered User
iTrader: (2)
Join Date: May 2003
Location: Northern Ohio
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
If you zoom in on the spec sheet above, you will see that the package can be ordered with 8.5, 11, or 11.5:1 pistons. So, running it with FI might make sense on the 8.5 pistons. Not sure if the package was intended for it, but the t-sleeves and 8.5 pistons suggest that it would work well.
#12
New Member
iTrader: (10)
I wonder how balanced the motor is throughout the entire rev range. I'm really interested in the kit, since I don't care for FI.
Curious, if the Z makes 8.2HP per 100cc of displacement, would it be within logical reason to say 800cc of added displacement could equal a gain of 65hp or theirabouts?
Curious, if the Z makes 8.2HP per 100cc of displacement, would it be within logical reason to say 800cc of added displacement could equal a gain of 65hp or theirabouts?
#15
Registered User
Originally posted by DaillestChoP
one thing's for certain, it will be making a little over 350 hp, and with f/i most likely around the 400+ hp range w/ about 8 psi
one thing's for certain, it will be making a little over 350 hp, and with f/i most likely around the 400+ hp range w/ about 8 psi
8.5 CR and that stroker, expect mid-high 400s.
#20
Registered User
Join Date: Aug 2003
Location: Los Gatos, CA
Posts: 1,981
Likes: 0
Received 0 Likes
on
0 Posts
Wonder what kind of power you would make with this kit, fuel mods, ECU, I/H/E, cams, Plenum.
Hmmmm, Seems like NA might be able to hang with FI soon! Of course, at an extra cost. And of course not with the stroker + FI.
Hmmmm, Seems like NA might be able to hang with FI soon! Of course, at an extra cost. And of course not with the stroker + FI.