O2 sensor bungs...
#1
Registered User
Thread Starter
Join Date: Aug 2004
Location: Barrington IL
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
O2 sensor bungs...
does anyone know where the ideal place is to put a wideband o2 sensor?... i am soon going to get somesort of AF wideband gauge/controller... but the thing is i am also getting testpipes, ypipe,and exhuast.... does any tespipe come with bungs prewelded in? any help would be great... preferably a Testpipe that has little to raspiness... also where would a EGT guage be mounted? do i need another bung for 1 of these when i go FI?
#2
Registered User
Join Date: Jul 2003
Location: Albuquerque, New Mexico
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
I have the Zeitronix Wideband. I also have Borla Exhaust w/RT Cats. The drivers side R/T Cat came with bung, but had to add a 2nd. Installed A/F in front of the cat and OEM in new location to the rear of the cat. Had to tap and mount EGT on the passenger to the rear of the cat.
#3
SFZCC
iTrader: (19)
Join Date: May 2002
Location: Lake Worth, FL
Posts: 7,419
Likes: 0
Received 0 Likes
on
0 Posts
The suggestion is to install the sensor at least 24 inches from block, I put mine afterthe turbo install and didn;t feel like removing the down pipes so I installed it just ahead of the rear stock 02 sensor since I ahve test pipes then the cat was not an issue and it looks to be the 24 inches from the engine.
As for the EGT sensor it is suggested that it be installed within 2 inches from the block on the exhaust manifold so it is as accurate as possible and actually reading close to temperature at the piston, back by the 02 sensor it is not giving much useful information.
As for the EGT sensor it is suggested that it be installed within 2 inches from the block on the exhaust manifold so it is as accurate as possible and actually reading close to temperature at the piston, back by the 02 sensor it is not giving much useful information.
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
Colombo
Forced Induction
35
11-09-2020 10:27 AM
350Z Project X
Maintenance & Repair
11
10-17-2015 05:16 PM