Another Z joining the dark side (LS6 swap)
#1
Another Z joining the dark side (LS6 swap)
Well the time has come to join the dark side. I loved my VQ being supercharger but just was not doing it for me. Like all of us I wanted more power and after weighing my options it was better for me to build an LS than build the VQ. So here is my progress so far...
Last edited by Kraize05_Z; 12-05-2017 at 06:32 PM.
The following 6 users liked this post by Kraize05_Z:
Atreyu'z 350 (12-06-2017),
BigBlue (12-06-2017),
BluestreamDE (12-06-2017),
JCat (12-07-2017),
MicVelo (12-06-2017),
and 1 others liked this post.
#4
350Z-holic
iTrader: (13)
subscribed...
#6
New Member
Oh man, that is pure sex! Are you working out of a speed shop or your own place?
Trending Topics
The following users liked this post:
zakmartin (12-07-2017)
#12
New Member
#14
I have some new pictures of the build..I wish I was farther ahead but like any build things pop up and modifications must be made.
Centerforce tripple disc with Kevlar and lighten flywheel
Sikky shifter for T-56 Magnum
Installed headers
The joys of wiring
Wanted to see how much space I have so I know how to make my intake
Centerforce tripple disc with Kevlar and lighten flywheel
Sikky shifter for T-56 Magnum
Installed headers
The joys of wiring
Wanted to see how much space I have so I know how to make my intake
#15
Master
iTrader: (8)
here is how my buddy ran his on his ls2 swap. if you wanted to change the look of the valve covers, you could look into Katech covers with coil relocation packs . also, what fuel rails are you using?
here is what the relocation pack makes it look like, i am going to cut the plugs off one day and solder the wires together so i can tuck it more under the fuel rail
here is what the relocation pack makes it look like, i am going to cut the plugs off one day and solder the wires together so i can tuck it more under the fuel rail
Last edited by travlee; 01-31-2018 at 03:12 AM.
#16
That is a nice setup your friend has. The fuel rails are actually from ebay haha..but I stripped the ecoat and I hard anodized the rails and made my own cross over hose. I bought the Holley tall valve covers due to my comp cam rockers. That intake did he make himself or buy it?