Please delete this thread

 

This is the ARK GRIP TD exhaust being compared to the 350Z Nismo exhaust!!

 

So one gained 2.8HP and 12.5ft lb torque and the other gained 4.7HP and 6.2ft lb torque but which is which. I assume that's an HR motor but those gains seem quite minimal. I hope I see better results when I install my exhaust this week sometime.

 

We had 3 runs on the dyno at SP Engineering and the first pic shows the first run and the last pic shows the last run. Keep in mind that this is the ARK exhaust being compared to the NISMO exhaust on a HR motor!

 

Oh now I get it, both dynos are the Ark vs. Nismo. I thought one dyno was stock vs. Ark and the other was stock vs. Nismo. In that case those gains are pretty good and I'm looking forward to seeing how my car dynos.

 

so this is like a better quality 0X2 which is a copy of the HKS...

 

From what I was told, there are differences in the resonators as well as the mufflers in addition to the x-pipe that neither the X02 or HKS have. Also the HKS has 120mm titanium tips while the Ark has 100mm Stainless tips that are welded on.

 

Our quality is between HKS and Greaddy system. no X02.

 

ark makes good parts, REALLY good parts, i had their exhaust on my supercharged tib for a while and it sounded incredible compared to everything else i had tried.

 

thank you for your complement 6speedwonder. This is small world ever.. found another ARK user from Hyundai Community. how about having an ARK new version GRIP this time...

 

you have a PM

 

http://img531.imageshack.us/my.php?image=mvi0140ke2.flv
take a look at the video guys!

 

id love to run your exhaust, was just going to buy an amuse front and tein springs...but maybe i can skip out on the bumper for a bit and get your exhaust...you have a pm!

 

Shipped !

 

just wait for the lowering spring. we're going to have them soon. it is under production GT-F spec coming in soon.

 

ARK and GRIP at Formula D, Long Beach battle !!

 

waiting on the springs till u start carrying them, u guys have the hookup on a camber kit too or will they not be necessary?

can u pm me some info on the development like what u expect the drop to be, what kind of spring rate, etc?

 

The drop should be about 1.0-1.2" in the front & rear and should be coming out in a month or so. You most likely won't need a camber kit to run on these babies!

 

is the x-pipe compatiable with authentic HKS TD? this might be a good selling point for the x-pipe alone you if you can make it available.

 

Yes, I would like to know that also.