I'm patiently doing a VQ swap into my 240 and i picked up a block that was missing a few things.

Like i said, im doing it slow, cheap and patiently, so im looking fors stuff on the cheap as its gonna be a while before its ready to drop. I am reasonable though, im not looking for you to give it away but its usually shipping that kills the deal for these small parts.

I havent gotten to raid any salvage yards yet.

What im looking for:

2004.5-05 Manual Trans ECU
Throttle Body
Slave Cylinder
Alternator
PS Pump
Front O2 sensors from 2004.5+
Single VTC cover, non revup
Gas Pedal
Cheap intake pipe
Crank Angle sensor connector... mine broke
Knock sensor Harness... Its just the single wire with 2 clips taped to the injector harness.
From blue clip to blue clip



Anything related to swap, mounts, driveshaft/front yolk,

 

Pmed

 

I got this if you still need it

Front O2 sensors from 2004.5+ (only 1)
Single VTC cover, non revup

 

I have a throttle body, alternator, ps pump, and I'm sure I have the small harness.

 

Any interest?

 

Im headed down to aGallardos place tomorrow. He should have most of it. Ill report back with what im lacking.

 

i have an oem 350z gas pedal. the aluminum one with drilled holes 10$ shipped? PM me.

 

Sorry, i need the pedal assembly, not just the pedal cover.

 

I've got a good used Slave Cylinder with a ss clutch line you might be able to use.

The setup came off a VQ35 swap setup that was in a 240, so the clutch line is much longer than out of a 350z.

40 bucks shipped/pp for both.

fixerbc1@gmail.com for faster reply/pics/etc.

 

I actually have more items you are looking for.

Single VTC cover for non revup and the alternator with a custom bracket that the previous owner used while the motor was in his 240.
I also have some DE exhaust manifolds that were modified to fit the 240 if interested.

Again email is fixerbc1@gmail.com for faster response.