Hey guys I have a 2003 track Z that I bought back in 2008 and had the intentions of building a 500 rwhp TTZ.
Unfortunately, I separated from the service and can't afford to finish the build.
However my loss will hopefully be someone's gain.

You can either reach me by PM or can call/text me at 917-806-7667 for a faster reply.

Location: Jacksonville Florida
Anyone that can make it to Jacksonville FL is more than welcome to come check out the engine while it's still running and in the car or even after it has been removed.

(Built VQ35DE) Asking price - 4,200 + Shipping
The engine was built by Speed Clinic in Orlando
Block - (Out of an 06 with <10k, honed decked, bored .020 over)
BC 264's
CP Pistons .020 over
ARP 12pt head stud kit
ACL Main Bearings (coated)
ACL Rod Bearings (coated)
Eagle Rods
ACL Thrust Washer
Rev-up Oil pump
MD 5/16 isothermal spacer
8.8:1 Compression
Crank - (Mahcined, balanced, etc.)
Heads - (Decked, Machined, New Valve Seals, etc)
All New Gaskets All Around

The block came from an 06 non-revup.
Various engine parts have been powdercoated black.
The engine has been ran for about 8,000 miles naturally aspirated and has no leaks.
It was purchased in 2009 from a forum member named Ragingbull350Z
Shortly after purchase I PCS'ed out of Jacksonville but left my car there. It has been garage kept until Nov 2012. The engine is still installed in the car but will be swapped out soon.
I have most of the receipts for the engine.

Thank you for looking and good luck

 

Am interested just need to know the rod info

 

Interested but want to know about the rod info as well

 

I haven't heard back from the guy and I feel like I've hit a dead end on this now. Don't know what else I can do to figure out the specifics on the rods..

I tried calling but he changed his number. I sent him a PM but he hasn't logged on since December 2010 and any emails I send to his paypal email come back undeliverable.. What are my options?

 

Gentlemen I have good news I now have more detailed information on the motor's specs. This is all from the original FS thread.


Hey everyone. I'm selling everything F/I and doing other things with that Money. Keep out my other threads for my stuff for sale. Down to Business....this motor was built from 04/08 - 09/08 by a reputable local shop. It costed me a total of about $7500 bewteen parts and labor.

*This is a Non-Rev Up Motor*

Block - (Out of an 06 with <10k, honed decked, bored .020 over)
Crank - (Mahcined, balanced, etc.)
Heads - (Decked, Machined, New Valve Seals, etc)
CP Pistons 8.8:1 Compression - (.020 Overbore)
Eagle Rods
ARP Head Studs
ACL Main Bearings(coated)
ACL Rod Bearings(coated)
All New Gaskets All Around
Brian Crower Stage2 Cams
Front Timing Cover (Triple Powdercoated Black)
Upper Plenum (Triple Powdercoated Black)
Brand New Oil Pump

 

Someone must need a fully built VQ35DE with low miles, broken in, and ready for boost!

Engine will be out of the car this weekend.

 

Great deal right here, fully built for you at an awesome price, if I had 4.2K I'd pick it up today haha. Good luck selling.

 

Thank you Haptic hopefully someone jumps on this soon.

 

Whats the rwp?

 

The engine was barely driven because I PCS'd to Kaneohe Bay and left my car in Jacksonville. The engine has not been boosted and I never got to finish my install/build so I don't have any numbers as far as horsepower to provide.