FS: Tanabe twin titanium mufflers + custom titanium midpipe 76mm/3"
#6
New Member
Thread Starter
hi rugbyforlife, nizmo_0385 is correct the nismo s tune will not work; it is just like the OEM one where it curves at the end (see here http://i254.photobucket.com/albums/h...x/SL370359.jpg)
actually as the 3 photos show it ends just a tiny bit past the subframe. the midpipe oddly ends exactly where my amuse does (i don't know too many systems that have that kind of setup. impul, tanabe, nismo, fujitsubo, etc.)
as i stated this would be ideal for someone making their own custom exhaust; it would be cheap to get a universal 3", a clamp, and have piping welded to fit
injen 3" universal stainless + titianium tip ~$200 USD
http://www.ebay.com/itm/121019517746
HKS 3" universal stainless + titanium tip ~$350 USD or best offer
http://www.ebay.com/itm/250808893244
Megan Racing 3" universal carbon wrapped + titanium tip ~$150 USD
www.ebay.com/itm/281064839715
ASPEC 3" universal actual titanium mufler ~$260 USD or best offer
http://www.ebay.com/itm/160979110364
----------
or if you already have a 3" single system wanting to switch out their stainless midpipe from their 3" single
agency power* (~$850 USD):
http://s754.photobucket.com/user/eva...14cad.jpg.html
ISIS (~$325 USD):
https://conceptzperformance.com/item...nal/z33cbe.JPG
AAM (~$770 USD):
http://www.b2autodesigns.com/popup_image.php?pID=4651
on each of the above the piping on the muffler would be too long and would need to be cut shorter to fit
*AP's website says the muffler canister is titanium but this thread says they said it weighs 25 lbs (https://my350z.com/forum/intake-exha...st-weight.html)
my amuse which has 2 canisters and a resonator weighs 19 lbs (2.4 kg midpipe, 6.23 kg muffler) so i dunno maybe someone who owns an agency power can chime in
hope this info helps?
actually as the 3 photos show it ends just a tiny bit past the subframe. the midpipe oddly ends exactly where my amuse does (i don't know too many systems that have that kind of setup. impul, tanabe, nismo, fujitsubo, etc.)
as i stated this would be ideal for someone making their own custom exhaust; it would be cheap to get a universal 3", a clamp, and have piping welded to fit
injen 3" universal stainless + titianium tip ~$200 USD
http://www.ebay.com/itm/121019517746
HKS 3" universal stainless + titanium tip ~$350 USD or best offer
http://www.ebay.com/itm/250808893244
Megan Racing 3" universal carbon wrapped + titanium tip ~$150 USD
www.ebay.com/itm/281064839715
ASPEC 3" universal actual titanium mufler ~$260 USD or best offer
http://www.ebay.com/itm/160979110364
----------
or if you already have a 3" single system wanting to switch out their stainless midpipe from their 3" single
agency power* (~$850 USD):
http://s754.photobucket.com/user/eva...14cad.jpg.html
ISIS (~$325 USD):
https://conceptzperformance.com/item...nal/z33cbe.JPG
AAM (~$770 USD):
http://www.b2autodesigns.com/popup_image.php?pID=4651
on each of the above the piping on the muffler would be too long and would need to be cut shorter to fit
*AP's website says the muffler canister is titanium but this thread says they said it weighs 25 lbs (https://my350z.com/forum/intake-exha...st-weight.html)
my amuse which has 2 canisters and a resonator weighs 19 lbs (2.4 kg midpipe, 6.23 kg muffler) so i dunno maybe someone who owns an agency power can chime in
hope this info helps?
Last edited by Vitamin_B12; 06-11-2015 at 07:10 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM