Pix of Momo Floor Mat Plates Installed!
07-24-2005, 03:46 AM
#21
Originally Posted by BhashaZ
BTW, I think the Momo mats don't look all that bad. I actually contemplated getting these a while ago, but never got around to them. If your interior is CLEAN...it looks a whole lot better. 
Thanks for the pix Sentry. They look good that way too. I would likely do them that way if it were not for the "owow"! Looks good nonetheless.
07-30-2005, 11:43 PM
#26
So are those things made out of Aluminium or what? I'm trying to find them on e-bay and elsewhere.
If they are aluminium, I would think you could use Acetone or the like and remove the Momo owoW logo alltogether. Then you could have an ingraving place etch whatever you want on them and it wouldn't wear off, like the Momo owoW would eventually.
Seems like they would just get all scratched up though?
You could always just hack of that part that protrudes and shape it like the other side, so it's a perfect rectangle. Then you wouldn't have to try to decide which end looks better facing which way:-P
Wonder how they are if your shoes are wet? Like a slip n slide?
I don't think they are all that bad but yes the passenger one looks out of place for sure. Do they sell them in pairs only or can ya just buy the driver side?
I go thru about 2-3 sets of mats a year and I'm sick of buying damn mats and my carpet underneth looks like a$$ after 8 years. I might be interested in something like this but just the drivers side.
If they are aluminium, I would think you could use Acetone or the like and remove the Momo owoW logo alltogether. Then you could have an ingraving place etch whatever you want on them and it wouldn't wear off, like the Momo owoW would eventually.
Seems like they would just get all scratched up though?
You could always just hack of that part that protrudes and shape it like the other side, so it's a perfect rectangle. Then you wouldn't have to try to decide which end looks better facing which way:-P
Wonder how they are if your shoes are wet? Like a slip n slide?
I don't think they are all that bad but yes the passenger one looks out of place for sure. Do they sell them in pairs only or can ya just buy the driver side?
I go thru about 2-3 sets of mats a year and I'm sick of buying damn mats and my carpet underneth looks like a$$ after 8 years. I might be interested in something like this but just the drivers side.
07-30-2005, 11:48 PM
#27
-REPLICA ARMY-
iTrader: (50)
Join Date: Oct 2004
Location: Yorba Linda, CA
Posts: 10,067
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Z-INCOGNITO
if anyone wants a set of MOMO Plates... i got one for sale
$60+ shipping (already mounted to Z Floor Mats)
$60+ shipping (already mounted to Z Floor Mats)
08-01-2005, 03:06 PM
#29
Originally Posted by Z-INCOGNITO
5 months old...
Do you still have them for sale? I don't want the mats, I just want the drivers side Grid and it's mounting hardware. Will you sell just the drivers side grid? If not, how much for just the 2 grids without the mats?
If you live within 50 miles of Santa Rosa I can pic them up.
Last edited by Chad68; 08-01-2005 at 03:22 PM.
08-01-2005, 05:04 PM
#30
they come in a pair
do a google search for momo floor mats to buy them
I think all of you guys are spending too much time thinking about which side should face what or if the passenger side looks good or not. Do what you want. I'm happy with my setup and don't even think about them anymore. There's aluminum all over the interior. Surely having some on the passenger side isn't THAT out of place. Otherwise I'd guess the driver's side would be out of place either
do a google search for momo floor mats to buy them
I think all of you guys are spending too much time thinking about which side should face what or if the passenger side looks good or not. Do what you want. I'm happy with my setup and don't even think about them anymore. There's aluminum all over the interior. Surely having some on the passenger side isn't THAT out of place. Otherwise I'd guess the driver's side would be out of place either
08-02-2005, 04:33 PM
#31
zachrosen or sentry65....What would they look like if they were turned over on the other side....showing the bottom side instead of the top? Is the finish the same? Just thinking out loud! I'm trying to avoid the MOMO label being shown. Too bad their isn't one available with the Z and 3 squares on each side!
BTW....They do look real nice.
BTW....They do look real nice.
08-02-2005, 06:03 PM
#32
Originally Posted by sluggoZ
zachrosen or sentry65....What would they look like if they were turned over on the other side....showing the bottom side instead of the top? Is the finish the same? Just thinking out loud! I'm trying to avoid the MOMO label being shown. Too bad their isn't one available with the Z and 3 squares on each side!
BTW....They do look real nice.
BTW....They do look real nice.
Ya know these things if you have the tools would be really simple to make out of 3/16-1/4" alumimium sheets.
08-02-2005, 06:47 PM
#34
Originally Posted by sentry65
the other side is recessed.
IMO it'd look well, upside down
the edges wouldn't be rounded out like they are when it faces the right way up
IMO it'd look well, upside down
the edges wouldn't be rounded out like they are when it faces the right way up
LOL these things are starting to sound like a pain now. Hmm well if you turn them this way or maybe that way, hmmm yes upside down and backwards looks quite nice as well. WTH.
Ahhhh if only we could turn them inside out. That would be the $****:-(
I still think they would be best if they were rectangles. And even better yet if it was just the drivers side. So why is that the passenger side has one longer side like the drivers side does? Do passangers typically have a longer left leg, than their right? At the very least the passangers side should at least be a rectangle. Oh wait but if you flip them then passengers would have longer right legs. I use to have a headache this big but I logged onto my350z.com and now it's THIS BIG!!!!
Crazy Momo Italians.
Now I don't even like them anymore:-)
08-02-2005, 07:09 PM
#35
Originally Posted by Chad68
LOL these things are starting to sound like a pain now. Hmm well if you turn them this way or maybe that way, hmmm yes upside down and backwards looks quite nice as well. WTH.
Ahhhh if only we could turn them inside out. That would be the $****:-(
I still think they would be best if they were rectangles. And even better yet if it was just the drivers side. So why is that the passenger side has one longer side like the drivers side does? Do passangers typically have a longer left leg, than their right? At the very least the passangers side should at least be a rectangle. Oh wait but if you flip them then passengers would have longer right legs. I use to have a headache this big but I logged onto my350z.com and now it's THIS BIG!!!!
Crazy Momo Italians
Now I don't even like them anymore:-)
Ahhhh if only we could turn them inside out. That would be the $****:-(
I still think they would be best if they were rectangles. And even better yet if it was just the drivers side. So why is that the passenger side has one longer side like the drivers side does? Do passangers typically have a longer left leg, than their right? At the very least the passangers side should at least be a rectangle. Oh wait but if you flip them then passengers would have longer right legs. I use to have a headache this big but I logged onto my350z.com and now it's THIS BIG!!!!
Crazy Momo Italians
Now I don't even like them anymore:-)
Thread
Thread Starter
Forum
Replies
Last Post
Extreme Dimensions
Southern California
0
09-24-2015 03:35 PM
