PIAA 66000k D2R Super Cobalt Installed (56 maybe)
02-23-2006, 08:34 AM
#21
Originally Posted by 2 low Z
Ok, you’re right about light output as far as intensity. As far as noticed change I have not lost anything. As I said before, I did want a cleaner look than the OEM without retrofitting the housings so yes I made a compromise. If I notice poor performance down the road, I'll take them out.
Poor choice, well that's your opinion. If you don't like it, fine don't buy them. This thread was intended to give a short review on the bulbs to those that are willing to go this route and make a VERY small compromise in light output. As you should know by now, modding whether it is for appearance or performance is all about COMPROMISING between evils. Reliability, efficiency, durability ECT.
Poor choice, well that's your opinion. If you don't like it, fine don't buy them. This thread was intended to give a short review on the bulbs to those that are willing to go this route and make a VERY small compromise in light output. As you should know by now, modding whether it is for appearance or performance is all about COMPROMISING between evils. Reliability, efficiency, durability ECT.
02-23-2006, 08:35 AM
#22
New Member
iTrader: (31)
Join Date: Apr 2003
Location: Broomfield, CO
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Anybody know a quality set of 6K bulbs that will fit the 2006 projectors?
I was told by Performance Nissan that the PIAA D2S don't fit right in the 06 projectors.
I was told by Performance Nissan that the PIAA D2S don't fit right in the 06 projectors.
02-23-2006, 08:39 AM
#24
Registered User
Thread Starter
Join Date: Oct 2003
Location: FL
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
ravi, did you have to just roll the fenders or did you have to pull them? My fender is even with the tire so I was worried that rolling wouldn't be enough. Camber isn't an option for me since it is my daily. If you get a chance PM me some pics when you lower it some more. I'm waiting for that Insane release in the second quarter.
I wouldn't say the violet from these bulbs are subtile, but not they are definatly not extreme either. The pics exagerate it a bit.
I wouldn't say the violet from these bulbs are subtile, but not they are definatly not extreme either. The pics exagerate it a bit.
02-23-2006, 08:42 AM
#25
Registered User
Thread Starter
Join Date: Oct 2003
Location: FL
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by titanjc
2 low Z, you should know that every HID thread has to turn into the "don't go over 4300K or you aren't putting out enough light" debate... 
I think it looks nice, good job.
I think it looks nice, good job.
But I do value opinions, which we all learn from.
02-23-2006, 08:43 AM
#26
Registered User
iTrader: (13)
Join Date: Dec 2002
Location: So Cal
Posts: 3,674
Likes: 0
Received 0 Likes
on
0 Posts
Thank you man, for sure I will hopefully be able to help you and Amit out with your decision--its been a long road and I'm almost there. I can't wait to post pics =p
How is flying lately--you're a pilot if I remember correctly right? Everything going good? Fender was "slightly" rolled b/c I am actually rolling on a lot of neg camber right now. Hoping to lose the neg camber by either cutting/or completely rolling the rears.
Ravi
How is flying lately--you're a pilot if I remember correctly right? Everything going good? Fender was "slightly" rolled b/c I am actually rolling on a lot of neg camber right now. Hoping to lose the neg camber by either cutting/or completely rolling the rears.
Ravi
02-23-2006, 08:49 AM
#27
Registered User
Thread Starter
Join Date: Oct 2003
Location: FL
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by desiZ
2lowZ: The parking light replacement LED's ... are those the ones from the thread some time ago about replacement LED bulbs, that eventually started dying out pretty quick ? if not where'd you get those? price/link ?
02-23-2006, 08:51 AM
#28
New Member
iTrader: (31)
Join Date: Apr 2003
Location: Broomfield, CO
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Yes of course, the amber LEDs were changed from the start. Eventhough I agree with you in principle, I'd still like to have 6K color. 
Originally Posted by GQ 350z
If you have the 06 projectors, I wouldnt touch them imo. The amber led's would go, but that is all.
Originally Posted by hbenet
Anybody know a quality set of 6K bulbs that will fit the 2006 projectors?
I was told by Performance Nissan that the PIAA D2S don't fit right in the 06 projectors.
I was told by Performance Nissan that the PIAA D2S don't fit right in the 06 projectors.
02-23-2006, 08:57 AM
#30
Registered User
Thread Starter
Join Date: Oct 2003
Location: FL
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GQ 350z
Thank you man, for sure I will hopefully be able to help you and Amit out with your decision--its been a long road and I'm almost there. I can't wait to post pics =p
How is flying lately--you're a pilot if I remember correctly right? Everything going good? Fender was "slightly" rolled b/c I am actually rolling on a lot of neg camber right now. Hoping to lose the neg camber by either cutting/or completely rolling the rears.
Ravi
How is flying lately--you're a pilot if I remember correctly right? Everything going good? Fender was "slightly" rolled b/c I am actually rolling on a lot of neg camber right now. Hoping to lose the neg camber by either cutting/or completely rolling the rears.
Ravi
Flying is cool thanks for asking, just glad to have a job these days. Pooring money in the Z probably isn't the best thing to do, bud I've been modding cars since I was 14. It's like crack.
F it, if it comes down to it, I can always say I have a 150 mph motor home. 
02-23-2006, 09:00 AM
#31
Registered User
Thread Starter
Join Date: Oct 2003
Location: FL
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hbenet
Anybody know a quality set of 6K bulbs that will fit the 2006 projectors?
I was told by Performance Nissan that the PIAA D2S don't fit right in the 06 projectors.
I was told by Performance Nissan that the PIAA D2S don't fit right in the 06 projectors.
02-23-2006, 09:03 AM
#32
Registered User
Thread Starter
Join Date: Oct 2003
Location: FL
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2 low Z
Not sure who sells them, but PIAA does make the 6600k Cobalts in D2S. There was a board member with a G not to long ago had some for sale for like $200. I think the Phillips 6000k come in D2S as well.
My bad, should have read the question better. Not sure about the 06, I could have sworn it was D2S.
02-23-2006, 09:05 AM
#34
Registered User
Thread Starter
Join Date: Oct 2003
Location: FL
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by desiZ
2lowZ: The parking light replacement LED's ... are those the ones from the thread some time ago about replacement LED bulbs, that eventually started dying out pretty quick ? if not where'd you get those? price/link ?
http://superlumination.com/194.htm
If I remember correctly, 194 is the same as the 168. Hope this helps.
02-23-2006, 12:18 PM
#35
New Member
iTrader: (31)
Join Date: Apr 2003
Location: Broomfield, CO
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
I have an update for this: I spoke with Jason at Performance a minute ago, and he indicated that the D2S PIAAs will indeed fit the 2006 projectors. I will order a set and post some feedback in a few weeks.
Originally Posted by hbenet
Anybody know a quality set of 6K bulbs that will fit the 2006 projectors?
I was told by Performance Nissan that the PIAA D2S don't fit right in the 06 projectors.
I was told by Performance Nissan that the PIAA D2S don't fit right in the 06 projectors.
02-25-2006, 05:21 AM
#36
Registered User
iTrader: (2)
Join Date: Jan 2006
Location: SoCal
Posts: 3,793
Likes: 0
Received 0 Likes
on
0 Posts
Regardless of what some people are saying about output and other bs, i think it looks hot! I was thinking of doing the same thing just because of the color so now i know what i need to do!!
G
G
03-10-2006, 05:51 PM
#37
New Member
iTrader: (31)
Join Date: Apr 2003
Location: Broomfield, CO
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Well, just got the 6600K bulbs installed during my scheduled service. The dealer called me twice warning me that the PIAAs were not XENON bulbs. Guess they don't know how to read Japanese. 
Long story short, after stating that I would take full responsibility if anything got damaged, they went ahead and installed them.
Now for the review:
The lights do look amazing, but I have to admit you actually notice a significant loss in visibility.
So in conclusion, if you live in a well-lit city and are looking for "style" this mod's for you.
Functional-wise be ready to "be seen more", but "see less".
Guess they don't know how to read Japanese. Long story short, after stating that I would take full responsibility if anything got damaged, they went ahead and installed them.Now for the review:
The lights do look amazing, but I have to admit you actually notice a significant loss in visibility.
So in conclusion, if you live in a well-lit city and are looking for "style" this mod's for you.
Functional-wise be ready to "be seen more", but "see less".
Last edited by hbenet; 03-10-2006 at 05:54 PM.
03-11-2006, 11:00 AM
#39
New Member
iTrader: (31)
Join Date: Apr 2003
Location: Broomfield, CO
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by davidf
Well if the dealer can't tell a halogen bulb from a real xenon bulb thats the last time that dealer would touch my car.
You should have seen all of their faces when the lights worked.
Nevertheless they left one of the wedge bulbs unplugged, so I got to go back today.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
