Central 20 Body Kit Fitment and Install
05-24-2006, 07:59 AM
#106
I agree with everyone else that it looks great! Smart move painting the rear section by the exhaust black. I finally dropped my C20 kit off at the bodyshop and hopefully should have everything done within 2 weeks. Car is Superblack.
I couldn't really see from the pictures but did you end up adding a grill and/or foglights? I need to order foglights and I forgot to measure the diameter of the holes so any help there would be appreciated. Same for the grill opening if you have that dimension. Thanks.
I couldn't really see from the pictures but did you end up adding a grill and/or foglights? I need to order foglights and I forgot to measure the diameter of the holes so any help there would be appreciated. Same for the grill opening if you have that dimension. Thanks.
05-24-2006, 08:21 AM
#107
Registered User
iTrader: (7)
Join Date: Jan 2005
Location: riverside/san Bernardino CA
Posts: 1,514
Likes: 0
Received 1 Like
on
1 Post
Hey anyone2u, This size of the two holes is 1-7/8" dia. I know the passanger side is a hair smaller then the driver side. But that 1-7/8" is just shy smaller then the passanger side. As for the grill, i got the gutter mesh from Home Depot 6"x36" i painted it with an enamel flat black with a clear coat on top. Worked out great.
05-24-2006, 10:35 AM
#110
Originally Posted by james840a
Hey anyone2u, This size of the two holes is 1-7/8" dia. I know the passanger side is a hair smaller then the driver side. But that 1-7/8" is just shy smaller then the passanger side. As for the grill, i got the gutter mesh from Home Depot 6"x36" i painted it with an enamel flat black with a clear coat on top. Worked out great.
-Roger
05-24-2006, 12:20 PM
#112
Registered User
iTrader: (7)
Join Date: Jan 2005
Location: riverside/san Bernardino CA
Posts: 1,514
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Anyone2u
Thanks James. That is exactly what I was looking for. Do you have any closeup pictures of the grill and foglights? I assume you used the ones that you had posted earlier. Hopefully Jeff won't mind you posting them!
-Roger
-Roger
I dont have them installed yet, im going to wait tell after the repaint is done, then ill install them. This weekend i need to replace a bad tweeter and add some stuff to my alarm system, Plus my harness.
05-24-2006, 12:25 PM
#113
Registered User
iTrader: (7)
Join Date: Jan 2005
Location: riverside/san Bernardino CA
Posts: 1,514
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by tekkensux
Yeah i got the specs thanks. So i am going with a black mesh grill. I will check out super autobacs since they have one that should fit. I am now thinking of fog lights. You think they can attach to the car or need to be connected to the bumper? I have not looked at it that closely. Good luck with your kit!
and not much room between. Tonight ill take some measurements and see.
05-27-2006, 10:34 AM
#114
Registered User
Thread Starter
iTrader: (5)
Join Date: Apr 2003
Location: So Cali
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Anyone2U: I posted a pic of my grill on prior pages.
I'll post some more shots of oit when I get a chance.
James: I got Volk SF Challenges Gloss Black +23 10.5 and +28 9.5.
Hit up F1 Motorsports.
The fog lights look like they will reallly have to stick out in order to fit because of that washer fluid like James said.
I'm still debating whether to repaint my parts. I think I'll probably end up doing it soon. The paint match is pretty off depending how you look at it...the pics hide it some but it is there for sure and pretty obvious.
Good luck with your kits and thanks for the feeback everyone.
I'll post some more shots of oit when I get a chance.
James: I got Volk SF Challenges Gloss Black +23 10.5 and +28 9.5.
Hit up F1 Motorsports.
The fog lights look like they will reallly have to stick out in order to fit because of that washer fluid like James said.
I'm still debating whether to repaint my parts. I think I'll probably end up doing it soon. The paint match is pretty off depending how you look at it...the pics hide it some but it is there for sure and pretty obvious.
Good luck with your kits and thanks for the feeback everyone.
06-01-2006, 02:01 AM
#115
Registered User
Thread Starter
iTrader: (5)
Join Date: Apr 2003
Location: So Cali
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Wing is on but its slightly crooked haha. I'll leave it as is though..Not too worried about the wing being 5cm off when the paint doesn't even totally match...also in process of creating brackets for the rear. Tried to drill larger holes in a bracket I bought and the drill almost took me out so I'm kinda scared right now of trying again. Sorry guys I don't have my digital camera or I would take pics and more pics of my grill for the guys who asked.
06-16-2006, 08:14 PM
#120
Registered User
iTrader: (7)
Join Date: Jan 2005
Location: riverside/san Bernardino CA
Posts: 1,514
Likes: 0
Received 1 Like
on
1 Post
tekkensux, i did last weekend checked it out. Im still thinking of a way to mount them. Im still waiting to take my car/bumber back into the body shop. This weekend im working on painting my side logos. And debaging the back burger badge. I filled in the two holes today, and sanded them smooth. Tomorrow morning ill be painting the color on, then my dupunt clear coat.