'06 Headlight upgrade issue!!! Help
#1
Registered User
Thread Starter
iTrader: (-1)
Join Date: Mar 2003
Location: Westchesta, New York
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
'06 Headlight upgrade issue!!! Help
Well I have a ' 04 Touring Roadster and spent the $1,500 for the heads and tails...I have them all installed and I come to find out I have the same problem that everyone has AND I have no blinker action!! WTF
My '04 has Xenons already on it so I thought this would just be a plug and play?? What is the deal? Can someone help my sorry *** out? And what is the deal with the blinker staying solid while the lights are on? I am freaking out can someone help me?
My '04 has Xenons already on it so I thought this would just be a plug and play?? What is the deal? Can someone help my sorry *** out? And what is the deal with the blinker staying solid while the lights are on? I am freaking out can someone help me?
#3
New Member
iTrader: (18)
Join Date: Dec 2005
Location: Beaumont, Texas
Posts: 5,668
Likes: 0
Received 0 Likes
on
0 Posts
Is it the actual blinker staying on or is it the park lamp. I have zero issues with mine. I did snip the wire to my park lamps killing the eggyolk look while my lights were on, it looks much better. It sounds like 2 wires are crossed, blinker/park most likely. Good luck.
#5
Registered User
Thread Starter
iTrader: (-1)
Join Date: Mar 2003
Location: Westchesta, New York
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
It is just the blinker staying on...I have not changed any wiring at all just plugged them in...Also is there a way to make the 3 orange led's white??
Should I buy that bulb that stays on white and blinks orange??
Or snip the wires on the bulb? People have said that...
Should I buy that bulb that stays on white and blinks orange??
Or snip the wires on the bulb? People have said that...
#7
Newbie
iTrader: (3)
Join Date: Feb 2004
Location: VA
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
this might have your answer. good luck.
https://my350z.com/forum/exterior-and-interior/220661-03-hid-06-hid-swap-problem-please-help.html
https://my350z.com/forum/exterior-and-interior/220661-03-hid-06-hid-swap-problem-please-help.html
Trending Topics
#8
Registered User
Thread Starter
iTrader: (-1)
Join Date: Mar 2003
Location: Westchesta, New York
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Still looking for help....I pulled the stock bulb out and there is a grey plastic piece attached to it so I am confused as to where I should snip?? I read on another thread to snip the center wire but I dont see it..I am confused! and getting ready to rage and smash these lights!!! Help
#11
Registered User
Thread Starter
iTrader: (-1)
Join Date: Mar 2003
Location: Westchesta, New York
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ilbkuup
just snip the middle two wires on the bulb so it takes away the "always on amber" feature
#13
Registered User
Thread Starter
iTrader: (-1)
Join Date: Mar 2003
Location: Westchesta, New York
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SixRB6
I just pulled the bulb and the bulb is in a plastic housing...Where is the wires I need to snip?? On the inside?? And what are you snipping them with to get inside that plastic housing??
Just pull the amber bulb out then you just snip the inside wire with cutters. The inside wire is farther away from the end of the plastic on one side. That is the one you snip on both side of the bulb...Real simple.
That solves the constant amber problem...
#15
Registered User
Thread Starter
iTrader: (-1)
Join Date: Mar 2003
Location: Westchesta, New York
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 350Z_LMS
so that means the bulb retains its blinking function right? I mean, it still works as a turn signal...I hope
#16
Registered User
iTrader: (5)
Join Date: Jul 2005
Location: orlando FL
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
try this:
make sure that when they are cut, all of the wire is gone. it there is a little piece left, it will not fix the problem. use a thin piece of electrical tape if you have to. i used a dab of liquid tape to cover the little wire "tit" that was left cut the wire.
hope this helps
make sure that when they are cut, all of the wire is gone. it there is a little piece left, it will not fix the problem. use a thin piece of electrical tape if you have to. i used a dab of liquid tape to cover the little wire "tit" that was left cut the wire.
hope this helps
#19
New Member
iTrader: (2)
Join Date: Aug 2006
Location: Dallas, Tx
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
You probably have a short... My bros Camaro SS had the same problem where the blinke stayd solid... new bulb and shor fixed and it worked fine again..
Could be wrong.. but just my 2 cents
Could be wrong.. but just my 2 cents
#20
Registered User
iTrader: (5)
Join Date: Jul 2005
Location: orlando FL
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 350Z_LMS
hey thanks a million for that!
did that fix the problem? if not, then its an electrical issue.