mooded my hood what do u think...(pix)
#1
Registered User
Thread Starter
mooded my hood what do u think...(pix)
Hi guys we r nearly there but i thought of mooding my hood mybe it takes some of the heat on the inside to the out side so here are the pics let me know what do u think.. sorry couldn't go backwords when i took the pic i dont know if u notice i am on a crain hight 1.5 m off the ground and on a thin edge.
#6
Registered User
Thread Starter
Originally Posted by Hraesvelg
Instead of cutting out the metal completely it would have been cooler to bend the metal to make a small louver (sp?)... probably would be much more difficult though.
Trending Topics
#8
Registered User
Thread Starter
Originally Posted by Hraesvelg
I was suggesting louver's slanted toward the driver so that the air passing over them would draw more air our from under the hood. Maybe they have an insert with a lip that could be placed inside your slits and welded on the underside of the hood for a clean appearance?
#12
Registered User
Thread Starter
Originally Posted by Meedo350
nice work dude , and keep going
#13
Registered User
iTrader: (13)
There are a couple other threads around where people have done this. It's to approximate the Nismo RS Concept hood.
Couple questions:
1. can you post some pics of the underside of the hood showing where/how the cuts affect the underlying structure?
2. How sturdy are the Aluminum slats? My concern is that they might bend easily with no added reinforcement under them.
Couple questions:
1. can you post some pics of the underside of the hood showing where/how the cuts affect the underlying structure?
2. How sturdy are the Aluminum slats? My concern is that they might bend easily with no added reinforcement under them.
#18
Registered User
Thread Starter
Originally Posted by bofa
More pics (whole car)
#20
Registered User
iTrader: (13)
Originally Posted by Cannysage
looks a bit rough around the edges.. good job, nonetheless
This one is much better:
See this thread and links within for more info. and templates:
https://my350z.com/forum/showthread....s+concept+hood