When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did you prep the clear strip before spraying the nightshades?
Yes, i wet sanded it with 400 grit wet sand paper. Then used alcohol to take off any residue. The only thing was it was around 50 degrees when i sprayed them.
Update: well the cardboard in the oven is a fire hazard waiting to happen. So i went with a cookie sheet ( just make sure its cool to start) I also tried to smoke out the amber strips, the VHT Nite Shades cracked up. I decided to just spray them black like the housings.
the paint is now drying in the sun.
I use the Cardboard BUT It has to be soaked !!!!!!!!!!!!!!!!!!!!!!!!!!!!! The cookie sheet will cause hot spots and u may end up with a mess !!!!!!!!!!!!!!!