Carbon Fiber Cooling Plate
#1
Registered User
Thread Starter
Join Date: Sep 2005
Location: cental cal
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Carbon Fiber Cooling Plate
This is a cooling plate I made for my Dad's 350z this last week.
sorry it is already dirty in some of the pics.
I have made a few for some friends and finally got around to taking pictures of this one.
It is made using all the things a proper piece of carbon fiber is made with. I used a vacuum bag along with mylar sheeting for a super shiny look. On this particular one I used a thin foam core to make it a little stiffer.
tell me what you guys think.
Also if anyone wants one let me know, I'll make you one for $80. A whole lot cheaper than APR's $125 listed on their site.
sorry it is already dirty in some of the pics.
I have made a few for some friends and finally got around to taking pictures of this one.
It is made using all the things a proper piece of carbon fiber is made with. I used a vacuum bag along with mylar sheeting for a super shiny look. On this particular one I used a thin foam core to make it a little stiffer.
tell me what you guys think.
Also if anyone wants one let me know, I'll make you one for $80. A whole lot cheaper than APR's $125 listed on their site.
#4
Registered User
Thread Starter
Join Date: Sep 2005
Location: cental cal
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bugsbbunny
It's supposed to go all the way across on each side. Kind of defeats the purpose if you leave the air duct open like that.
the purpose of this is to cover up the hole in front of the radiator. I modeled it after the APR one.
thanks for the input
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM