Emblem removal???
#3
yea, use a heat gun or hairdryer on the emblem to soften the adhesive. use dental floss/fishing line to get underneath the emblem. once you get it off, clean off excess adhesive.
#6
Yes, the 350Z emblem has NO holes behind it no matter what.
Nissan emblem does have 2 holes on the coupe (from my own experience) but none on the roadster (from others' experience). I had mine shaved at a body shop.
Nissan emblem does have 2 holes on the coupe (from my own experience) but none on the roadster (from others' experience). I had mine shaved at a body shop.
#7
Originally Posted by istan
On the Hamburger, not the "350Z". Right?
if your askin about the emblems that say 350Z to the left of the badge then no, there are no holes there, they are just adhesive but if you take them off make sure you dont want them back on again because they are all separate pieces and will be very hard to put back on correctly.
Last edited by Escobar; 12-07-2007 at 04:16 PM.
Trending Topics
#10
I did post about 10 minutes before I went to lunch
I have a Roadster (No Hamburger Holes), and I removed the badges. But for the longest time, I left the Z emblem on the side on. I don't know why, but I liked it.
I have a Roadster (No Hamburger Holes), and I removed the badges. But for the longest time, I left the Z emblem on the side on. I don't know why, but I liked it.
#11
The 350z was really easy to get off, but the hamburger required a lot of heat gunning. I ended up using a petroleum-based decal remover similar to goo gone, and a plastic butter knife. My car is also an '03, so it was pretty nasty.
#12
haha, I have never herd it called the hamburger. Hey fiveninezero, do you have a roadster? If not, have you got a quote or anything on how much it is gonna be to get the 2 holes filled?
#13
I took my 350Z off, it wasnt hard at all. It looks like it was never there. Then i tried to take the Nissan symbol off, yeah that was a mistake, lol. I started to take it off, then i saw the holes so i quickly put it back on, lol. But i am workin on getting the gold powdercoated one.
#15
Originally Posted by Escobar
Yeah, I really want it off. I am just wondering how much to fill & paint the holes. It doesnt really seem worth it.
#17
Buy a carbon hatch.
Just kidding. Yes, as everyone else has said, the center hamburger emblem has these two holes. Pull the emblem off, and you get a nice pignose effect on your rear end. If you do decide to get them shaved, yank the antenna and get that hole filled. In fact, get rid of the antenna while you're at it.
Just my .02
kthxbye
Just kidding. Yes, as everyone else has said, the center hamburger emblem has these two holes. Pull the emblem off, and you get a nice pignose effect on your rear end. If you do decide to get them shaved, yank the antenna and get that hole filled. In fact, get rid of the antenna while you're at it.
Just my .02
kthxbye
#19
Originally Posted by Escobar
yeah, I don't think I will be doing that for a while, why did they have to put those holes there?