Just spent the last 45 minutes looking for directions on how to remove my door handles and came up with nill... 33 pages on the search for door handle removal by title REDICULOUS. Someone please point me in the right direction for a DIY or just tell me. Thanks

 

Open door pull out two rubber plugs. Unbolt to 10mm bolts. Wiggle handle until it works out. Release lock and latch cables.

 

^lol

 

lol the job takes less time than he spent searching

 

Measure twice cut once... Rather safe than sorry and I like to be prepared when I work on my car. I wouldn't have known it was a quick job unless I asked and as stated above I searched the endless pages but came up with nothing thanks

 

QFTMFW.. thanks for searching first. I would have done the same thing. The indexing on this site does kinda blow.

 

Driver Door:
1. Open door.
2. Locate & remove 2 rubber grommets right behind the door handle.
3. Unbolt the 2, 10mm bolts holding the handle in & be careful not to drop the bolts down the door.
4. Pull up & out on the door handle, you'll see that it was attached by 2 metal rods.
5. Flip the yellow or pink clip up to release the metal rod.
6. Unbolt the electronic key lock.

Passenger Door:
Same as above except there are no metal rods to disconnect & no electronic door lock done. Easier!

 

Just what i was looking for. Thanks everybody lol

 

No thank YOU for searching

 

a body shop wanted to charge me 150 remove and paint black, i laughed, i aked how much if i remove, they replied 50.. deal.. 100 to remove 4 bolts 2 rods and keylock lol

 

^ you should have painted it yourself!! its even cheaper lol. or wrap them in carbon fiber vinyl like i did, turned out great!

 

 

this post helped me alot thanks guys