The guy who was HIGHLY recommended Invica Shield, is putting my clear bra on at my house as we speak!!!!

This guy is supposed to be the best in the New Jersey Tri-State area! He's been wonderful to work with so far and I'll recommend him after I see if the job is good. Takes two weeks to "cure", not too excited about that, but what's good for the Z is good for ME!

 

How did you find the guy??

I would like to find someone in the Cincinnati area that does this kind of work!

 

Invinca-Shield, Inc. [info@invinca-shield.com]

Email this..., The rep was named Tom Bell, hooked me up with the best person in my area; maybe he can do the same for you.

 

Thanks! Will do that!

I also have the daytona blue...and with frost leather interior, NAV system, and a stillen front grille as soon as I can figure out how to use the GD clips they sent with it....their instructions suck!

 

I found someone in Dayton to do it (the guy has been doing it for a looong time the lady said). But the only thing is, they are only open during the week - no weekends.

I am going up to Chicago for the holiday and the week after that. I found a guy up there to do it, but our schedules conflict so much that it will be impossible for him to do it while I'm there. I might just get it done in Dayton. That one is $300-something dollars for the whole kit.

 

Hey! thank you for that info!! Dayton is where I bought my car!! heh! Can you give name and number of this guy that does the bras?

I also noticed your sig says you have the val hardwired in....I have the Val with remote display...where'd you make the connection? I still plan to use the suction cups on the unit itself since I like to take it with me in other cars I drive!

Thanks again!

 

Just be prepared for the bra to look like crap when it's on for the first time.

I should say it looks like crap, but it takes 2 weeks to a month to fully cure. I was kind of shocked when I first saw it, then the guy shows me pictures of what it will look like, so I'm cool...

 

Who was the person that was recommended in Dayton???

 

Probably Rudy Poa in Dayton.

The product should not look too bad after the install maybe a little haziness, but will mostly gone within a day or two. That is with the 3M film and whether or not they use soap to apply. The product does take a full month to totally cure out. There is another good installer in Hoboken I know of. He also does window tint too!!

If you need an installer in Chicago let me know.

 

Julious Poa is probably the best person in Dayton area to do it. Rudy is his brother and they used to do it together, but Rudy moved away. Julious did mine with a friend of his in the Cleveland area. His shop is in Miamisburg (Dayton area), I have his card, but am not sure of the name of his shop off the top of my head.

 

Hey Fanatic6711....

I live in Jersey too. I am buying a 350z touring model this month. I am interested in some sort up clear coating to protect the paint in the front. Could you give me the name and # of the guy who installed yours and share with me your experience.....how does it look now???, was the installer as good as advertised?...what did it cost?.....any info will be helpful. Thanks....

 

Basically, I don't want to recommend this guy yet, cause I still see bubbles in the clear bra.... but it hasn't had the full cure time.

I've had in on for about 3 weeks, but it still has a few bubbles here and there.

Supposedly he was the best in NJ area as he trained people do install this product. I was given his name by the rep at Invica Shield.

The whole cost was 800 bucks for a full kit installed and applied at my house.

 

Hey

Sorry...as stated above, I was out of town for the holiday weekend and all of this week. I am looking for the number of the shop in Dayton that I contacted. I believe it is in my office and I am not going back into the office until Monday. If I find it, I will let you know.

Looks as though I will be trying to get mine done in Dayton as well. However, they dont install on the weekends! Which means I will have to take a personal day just to get it done.

Will let you know, though.

 

The shop in dayton i spoke with was:

Pro Trim of Ohio
937-890-5551
5929 North Dixie Dr.

She quoted me at $395 installed for the unigard kit.

My V1 is hardwired into the Homelink mirror. I'm still using the suction cups in my windshield.