JDM Fender Blinker Question
#1
Registered User
Thread Starter
JDM Fender Blinker Question
So I've been thinking about getting the JDM fender blinkers, the side marker that mounts under the Z emblem on the fenders, but all the ones I find don't include the wire harness. Here's an example:
http://cgi.ebay.com/ebaymotors/New-F...spagenameZWDVW
Anyone know where you can get the harness, or how you can hook up a light in there that will blink with the turn signals? Or do people just install the blinker with no light?
Thanks...Dre
http://cgi.ebay.com/ebaymotors/New-F...spagenameZWDVW
Anyone know where you can get the harness, or how you can hook up a light in there that will blink with the turn signals? Or do people just install the blinker with no light?
Thanks...Dre
#2
Registered User
iTrader: (66)
Join Date: Jul 2004
Location: Queens, New York
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
I believe the harness I got was off a civic? I am not 100% sure since I got it a few years back. You would need to splice the wires onto your headlights which I forgot to do.
I am going to leave it so it doesn't blink for now, and instead use that harness for the inside red reflectors by the doors.
I am sure you can use any harness such as for the Evo's or any car with side markers.
I am going to leave it so it doesn't blink for now, and instead use that harness for the inside red reflectors by the doors.
I am sure you can use any harness such as for the Evo's or any car with side markers.
#5
Registered User
iTrader: (7)
Join Date: Jan 2006
Location: SoCal---->NorCal
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
I think is all you need. This plus connecting them to the blinker wires.
http://mynismo.com/products/?id=5306
Let me know how it goes, if you do it maybe we can sticky it on the tech DYI forum. Good luck.
-Ronnie
http://mynismo.com/products/?id=5306
Let me know how it goes, if you do it maybe we can sticky it on the tech DYI forum. Good luck.
-Ronnie
#6
Registered User
Thread Starter
LOL nice! Maybe if I just install the blinker and add some of that fluid it will light up on it's own!
rxkevin
Thanks for the feedback, I didn't think to look for other harnesses that might fit.
Ronnie, I think that's exactly what I've been looking for! Thanks!
rxkevin
Thanks for the feedback, I didn't think to look for other harnesses that might fit.
Ronnie, I think that's exactly what I've been looking for! Thanks!
Last edited by xdrex; 04-10-2008 at 10:34 AM.
Trending Topics
#10
Registered User
Thread Starter
Originally Posted by DRFTER_Z
did you look at the link?
I think I'll just get that harness first and see if I can get it wired into the turn signal. If I can get that to work I'll get the blinker housing and have it mounted.
Thanks Drifter you're the man!
Thread
Thread Starter
Forum
Replies
Last Post