Tommy Kaira Shift Knob + '06-'8 Evo-R CF Shifter Panel
Thread Starter
Registered User
iTrader: (20)
Joined: May 2006
Posts: 369
Likes: 0
From: Costa Mesa, CA
Tommy Kaira Shift **** + '06-'8 Evo-R CF Shifter Panel
Thanks to Visionary Racing for the TK ****+finisher, and to Evo-R for the CF shift panel. Here's a pic of it for people wondering what it looks like 
Sorry for the crappy phone pics.
Sorry for the crappy phone pics.
Last edited by sosojeffcc; May 24, 2008 at 08:31 PM.
Looks good. Just wondering if that bothers you that the bottom portion of your dash kit pops out a bit with the D3. Just wondering cause mine does that too and sometimes it just bothers me. I guess its just the plastic being tightly fitted. CF and shifter look top notch.
Thread Starter
Registered User
iTrader: (20)
Joined: May 2006
Posts: 369
Likes: 0
From: Costa Mesa, CA
Originally Posted by amorin4122
Looks good. Just wondering if that bothers you that the bottom portion of your dash kit pops out a bit with the D3. Just wondering cause mine does that too and sometimes it just bothers me. I guess its just the plastic being tightly fitted. CF and shifter look top notch.
Trending Topics
I think people are using the term "rice" in the wrong context.
If buying rare JDM parts is rice than that must be what all the top JDM company cars should be called.
BTW, nice shifter and cf cover.
If buying rare JDM parts is rice than that must be what all the top JDM company cars should be called.
BTW, nice shifter and cf cover.
Originally Posted by rxkevin
I think people are using the term "rice" in the wrong context.
If buying rare JDM parts is rice than that must be what all the top JDM company cars should be called.
If buying rare JDM parts is rice than that must be what all the top JDM company cars should be called.
JDM does not mean the most expensive shift **** ever made...
as far as know JDM z has the same **** as the rest of the world....
also the 2 pound, hot as hell **** adds nothing and may even cause problems ( i don't know for sure , but there is a plastic bearing there that could wear out)
oh yea, it does look sick as hell !
Last edited by Tac-M; May 25, 2008 at 02:09 PM.
That finisher looks HORRIBLE with the TK. You need to get a wiring grommet and just cut the bottom half off. Looks INFINITELY better. I need to get a pick of mine for you
edit for pic:
Sorry it is a bit blurry, but I was rushing... That machined finisher ruins the TK feel and look. Doesn't match finishes, artificially raises the **** from where it should sit, and the sharp angles do not flow with the ****... just a horrible selection and visionary should be ashamed that, that is their offering for a finisher for such a high buck shift ****. I got my grommet down at napa for 3 bucks, just cut half of it off and it fits and looks perfect.
edit for pic:
Sorry it is a bit blurry, but I was rushing... That machined finisher ruins the TK feel and look. Doesn't match finishes, artificially raises the **** from where it should sit, and the sharp angles do not flow with the ****... just a horrible selection and visionary should be ashamed that, that is their offering for a finisher for such a high buck shift ****. I got my grommet down at napa for 3 bucks, just cut half of it off and it fits and looks perfect.
Last edited by Zivman; May 25, 2008 at 02:39 PM.
Originally Posted by Rowlett
I love the TK shift ****... well worth the 200 bucks, and i know that a civic wont be sporting it...
i wouldn't be too sure about that. TK does make them for universal fit. i am sure thre are some fanbois out there who would sport this ****
Is that **** really made out of lead? Another member bought one and posted that it may have been made of lead. I don't imagine lead as a good material for something one would touch with their bare hands on a regular basis.
Nice set up. Is that CF a replacement or cover for the OEM "aluminum-look" shift area?
Nice set up. Is that CF a replacement or cover for the OEM "aluminum-look" shift area?
Registered User
iTrader: (8)
Joined: Jan 2004
Posts: 726
Likes: 0
From: Northridge, Earthquake Central
Originally Posted by Zivman
That finisher looks HORRIBLE with the TK. You need to get a wiring grommet and just cut the bottom half off. Looks INFINITELY better. I need to get a pick of mine for you
this man knows what he's talking about... i agree 100% about that finisher...doesn't suit the design of the **** very well....that rubber grommet is 1000times better
Thread Starter
Registered User
iTrader: (20)
Joined: May 2006
Posts: 369
Likes: 0
From: Costa Mesa, CA
Originally Posted by Zivman
That finisher looks HORRIBLE with the TK. You need to get a wiring grommet and just cut the bottom half off. Looks INFINITELY better. I need to get a pick of mine for you
edit for pic:
Sorry it is a bit blurry, but I was rushing... That machined finisher ruins the TK feel and look. Doesn't match finishes, artificially raises the **** from where it should sit, and the sharp angles do not flow with the ****... just a horrible selection and visionary should be ashamed that, that is their offering for a finisher for such a high buck shift ****. I got my grommet down at napa for 3 bucks, just cut half of it off and it fits and looks perfect.
edit for pic:
Sorry it is a bit blurry, but I was rushing... That machined finisher ruins the TK feel and look. Doesn't match finishes, artificially raises the **** from where it should sit, and the sharp angles do not flow with the ****... just a horrible selection and visionary should be ashamed that, that is their offering for a finisher for such a high buck shift ****. I got my grommet down at napa for 3 bucks, just cut half of it off and it fits and looks perfect.
Thread Starter
Registered User
iTrader: (20)
Joined: May 2006
Posts: 369
Likes: 0
From: Costa Mesa, CA
Originally Posted by Phantom Menace
Is that **** really made out of lead? Another member bought one and posted that it may have been made of lead. I don't imagine lead as a good material for something one would touch with their bare hands on a regular basis.
Nice set up. Is that CF a replacement or cover for the OEM "aluminum-look" shift area?
Nice set up. Is that CF a replacement or cover for the OEM "aluminum-look" shift area?
Thread Starter
Registered User
iTrader: (20)
Joined: May 2006
Posts: 369
Likes: 0
From: Costa Mesa, CA
Originally Posted by Tac-M
it is a joke dude !
JDM does not mean the most expensive shift **** ever made...
as far as know JDM z has the same **** as the rest of the world....
also the 2 pound, hot as hell **** adds nothing and may even cause problems ( i don't know for sure , but there is a plastic bearing there that could wear out)
oh yea, it does look sick as hell !
JDM does not mean the most expensive shift **** ever made...
as far as know JDM z has the same **** as the rest of the world....
also the 2 pound, hot as hell **** adds nothing and may even cause problems ( i don't know for sure , but there is a plastic bearing there that could wear out)
oh yea, it does look sick as hell !
plastic bearing?