My clear corner install write-up
Thread Starter
Registered User
iTrader: (7)
Joined: Apr 2008
Posts: 2,089
Likes: 0
From: Manassas, VA
You may be able to feed them down there. I was figuring on the wires being attached to the corners and you having to feed them to the acc. circuit or however your hooking them up. Never-the-less, go ahead and follow my directions and look around and see if you can do it with out taking the bumper off. If you have to take it off, you’re already half way there anyway.
Last edited by 07rdsterGT; Jun 3, 2008 at 07:22 AM.
Originally Posted by 07rdsterGT
You may be able to feed them down there. I was figuring on the wires being attached tot he corners and you having to feed them to the acc. circuit or however your hooking them up. Never-the-less, go ahead and follow my directions and look around and see if you can do it with out the bumper off. If you have to take it off, you’re already half way there anyway.
Thanks for the info, I kind of stayed away from this mod because I didn't want to go through the hassle and take off the bumper. I'm now re-considering the idea of swapping to clears 
Originally Posted by finalforce
Thanks for the info, I kind of stayed away from this mod because I didn't want to go through the hassle and take off the bumper. I'm now re-considering the idea of swapping to clears
I didn't remove my front bumper to change these either... Just used ramps to life my car enough for me to wiggle underneath- and stuck my arm between the wheel liner and the skid guard. The clear corners were very easy to remove and replace... it's a tight fit, but i have stick arms...if you have large arms and hands, this might not be the ideal way for you to do it.
Originally Posted by Z04
better than making a new thread and basically repeating what was done in a thread that was made two years ago then act like it was a new thing you discovered. good for you, you did one of the simplest mods that you can do for the Z.
https://my350z.com/forum/showpost.ph...7&postcount=50
and you even posted in that thread since it mentioned that you do not need to remover the bumper.
so basically repeating something that already exists is not contributing either.
https://my350z.com/forum/showpost.ph...7&postcount=50
and you even posted in that thread since it mentioned that you do not need to remover the bumper.
so basically repeating something that already exists is not contributing either.
Dude, STFU. His doesn't require you to take the bumper, wheel off which is a pain just to do reflectors. You DON'T need to do that. His is better than that two year old one you are recommending.
guys. chill out.
The more help from the community, the better is it for us.
There is no BEST way to install Clear corners... now we are open to 2 options. It is always better than 1.
The more help from the community, the better is it for us.
There is no BEST way to install Clear corners... now we are open to 2 options. It is always better than 1.
