well guys i just fixed the window motor in my 03 350z and i cant figure out how to reprogram it ...

well i programmed it to roll down a bit when you open the door but this is where i get lost ...

well it does the anti pinch but then when you go to close the door the window just rolls down half way ....

also i cant get the auto up and auto down to work .... please help me out ...

-derek

 

I didn't know that could be changed... I hope you find an answer because i'm interested.

 

Sounds like what happened to my car(hope its not) b/c it ended up being my BCM becoming faulty

 

See my Stickied How-To thread in the maintenance section. It has the reset procedure inside....

 

did you do the motor reset?

if you search those terms theres a clear how to with pics. just did mine the other day. took 10 mins

basically u r pushing the motor reset button and rolling the window down. then release the reset button and roll the window up. doing that with the door closed and not using auto up or down.

 

try the motor reset....but I just unplugged the battery for a day and it worked