Official Racing Harness Pic Collection!
#21
Thread Starter
Joined: Jan 2006
Posts: 11,204
Likes: 29
From: San Antonio/I miss DFW, TX
Well from this pic:
It looks as if he criss crossed them to the baby seat anchor.....probably bought another one for the drivers side OR got an eye bolt for the drivers side or both......its hard to tell, but it looks as if he went to the anchor points as the belts appear to be going to the hatch floor......hard to tell...
This is the anchor on the passenger side - M8x1.25:
Drivers side i found to be 5/16x18 - odd for RH drive:
-J
It looks as if he criss crossed them to the baby seat anchor.....probably bought another one for the drivers side OR got an eye bolt for the drivers side or both......its hard to tell, but it looks as if he went to the anchor points as the belts appear to be going to the hatch floor......hard to tell...
This is the anchor on the passenger side - M8x1.25:
Drivers side i found to be 5/16x18 - odd for RH drive:
-J
Last edited by JasonZ-YA; 12-16-2009 at 09:36 AM.
#22
Thread Starter
Joined: Jan 2006
Posts: 11,204
Likes: 29
From: San Antonio/I miss DFW, TX
The only thing to keep in mind when you want to install harnesses is that you already have the mounting point for the bottom of one lap belt, but you will need to drill a hole and mount a backing plate in the transmission tunnel to secure the eye bolt for the other lap belt.
many many people don't realize this when buying harnesses...
Also, i must add........per the racing rule book - it needs to be on a 4 inch x 4 inch welded plate on the tranny tunnel, NOT just on the tranny tunnel.....
-J
Last edited by JasonZ-YA; 12-16-2009 at 09:39 AM.
#23
Thread Starter
Joined: Jan 2006
Posts: 11,204
Likes: 29
From: San Antonio/I miss DFW, TX
I need to get a shot of how the belts are wrapped onto the harness bar as well. I did it opposite of MethodRN's so that the excess belts are on the bottom of the buckle instead of the top so they hang down onto the interior pieces instead of flapping around when the windows are down.
*Edit* Found some pics... If this method is incorrect, someone please let me know now.
*Edit* Found some pics... If this method is incorrect, someone please let me know now.
see attached....
over top:
Also, not the bottom left image showing the mounting brackets and how they are to be inline to the load path, not 90 degree's where the bracket itself can bend/break!
-J
Last edited by JasonZ-YA; 12-16-2009 at 09:45 AM.
#24
Ive got a few..Custom Harness Bar by Jason Z-YA
Fits like a glove..OJ style..
Bolts right up to OEM bolts
Custom Camera MT for EVENTS
Got 4 Pt Camlock Harnesses from FLEABAY.. Followed the directions Jason posted earlier on the install of those. That was cake..
All in all - I love it and its nice to know that its in SPEC to say the least. I didnt have the COIN to throw down on a new harness and after seeing the product I just had to have one..
Bolts right up to OEM bolts
Custom Camera MT for EVENTS
Got 4 Pt Camlock Harnesses from FLEABAY.. Followed the directions Jason posted earlier on the install of those. That was cake..
All in all - I love it and its nice to know that its in SPEC to say the least. I didnt have the COIN to throw down on a new harness and after seeing the product I just had to have one..
#29
I will 2nd AcidJake's post on this deal..............
JasonZya's harness bar is THA CHIT!! Its a mother to install but the finished product is untouchable....no other bar ive seen even compares to this one, in looks or strength. I have shaken the Sparco bar in person, and it wiggles all over the place, but i can shake the hell outta Jason's bar and it doesnt move an inch.
Props to Jason for one helluva product!
Pics up to add to the love here, but car is in the ER at the moment.
JasonZya's harness bar is THA CHIT!! Its a mother to install but the finished product is untouchable....no other bar ive seen even compares to this one, in looks or strength. I have shaken the Sparco bar in person, and it wiggles all over the place, but i can shake the hell outta Jason's bar and it doesnt move an inch.
Props to Jason for one helluva product!
Pics up to add to the love here, but car is in the ER at the moment.
#31
Registered User
iTrader: (14)
Joined: Oct 2007
Posts: 1,314
Likes: 9
From: Greenwell Springs, Weeziana
Never done!
Here's a pic of mine, but I never installed it! I couldn't find a way to do it that I felt comfortable with haveing the Cusco cage in there. It's been sitting in the box for over two years now...just waiting...
#32
For all you "JDM" fans, though it's not made by a Japanese company, check out Option magazines and you'll see Willans harnesses are just as popular in tuner cars in Japan.
Willans offers their harness in a variety of colors and styles. Also available with option for wrap around or bolt in style for shoulder harness.
http://www.willans.com/fia-approved-...w-all-products