If you're considering 6000K here's a pic....
#1
Registered User
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: THE MIA
Posts: 3,030
Likes: 0
Received 0 Likes
on
0 Posts
If you're considering 6000K here's a pic....
I just installed my 6000K D2S bulbs and I'm very happy with the color and light output. I have day and night shots. Enjoy.
#5
Registered User
iTrader: (5)
Join Date: Apr 2007
Location: NJ
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
I only pulled apart the inner wheel lining for mine, was a pain, but I was lazy to take the bumper off, looks good. I have Philips 6k's but Ive yet to see any other brand of 6k's look similar. Mine have a purplish hue and love them, definetly look exotic.
#7
Registered User
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: THE MIA
Posts: 3,030
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lgear080
looks nice. hate my yellers. where did you get 'em? how much?
Originally Posted by wildrice09
Looks good man. You have to take off your entire bumper just to change some bulbs? What a PITA.
Originally Posted by Accordaleer
I only pulled apart the inner wheel lining for mine, was a pain, but I was lazy to take the bumper off, looks good. I have Philips 6k's but Ive yet to see any other brand of 6k's look similar. Mine have a purplish hue and love them, definetly look exotic.
Last edited by Jes-Z; 09-21-2008 at 06:36 PM.
Trending Topics
#13
Registered User
iTrader: (48)
lol what a coincidence!! I bought a 6k D2S HID kit last week and decided to install them today.
Got the bumper off and everything, removed the headlights and the stock HID ballast. Then found out that the wiring on the aftermarket HID kit wont fit into the stock wiring because it is too fat...
so i decided to put the stock back and black out my side markers..
How did you wire up the HID to the stock wiring? pics would be great too.
P.S. to remove the front bumper faster, you can just turn the wheels to remove the 3 bolts in the wheel liner, then all the bolts at the bottom. I removed the front bumper in less than 10 minutes and it make it much better to attempt to switch the HID.
Thanks for the help!
Got the bumper off and everything, removed the headlights and the stock HID ballast. Then found out that the wiring on the aftermarket HID kit wont fit into the stock wiring because it is too fat...
so i decided to put the stock back and black out my side markers..
How did you wire up the HID to the stock wiring? pics would be great too.
P.S. to remove the front bumper faster, you can just turn the wheels to remove the 3 bolts in the wheel liner, then all the bolts at the bottom. I removed the front bumper in less than 10 minutes and it make it much better to attempt to switch the HID.
Thanks for the help!
#14
Registered User
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: THE MIA
Posts: 3,030
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1001
looks good but why is your signal area soo blue too??
Originally Posted by *ICE*
lol what a coincidence!! I bought a 6k D2S HID kit last week and decided to install them today.
Got the bumper off and everything, removed the headlights and the stock HID ballast. Then found out that the wiring on the aftermarket HID kit wont fit into the stock wiring because it is too fat...
so i decided to put the stock back and black out my side markers..
How did you wire up the HID to the stock wiring? pics would be great too.
P.S. to remove the front bumper faster, you can just turn the wheels to remove the 3 bolts in the wheel liner, then all the bolts at the bottom. I removed the front bumper in less than 10 minutes and it make it much better to attempt to switch the HID.
Thanks for the help!
Got the bumper off and everything, removed the headlights and the stock HID ballast. Then found out that the wiring on the aftermarket HID kit wont fit into the stock wiring because it is too fat...
so i decided to put the stock back and black out my side markers..
How did you wire up the HID to the stock wiring? pics would be great too.
P.S. to remove the front bumper faster, you can just turn the wheels to remove the 3 bolts in the wheel liner, then all the bolts at the bottom. I removed the front bumper in less than 10 minutes and it make it much better to attempt to switch the HID.
Thanks for the help!
Last edited by Jes-Z; 09-21-2008 at 09:35 PM.
#16
Registered User
iTrader: (2)
Join Date: Feb 2008
Location: SoCal*818*
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
can u post a pic of the light output? I just bought some 5000k bulbs and would luke to see the difference from yours? Pls thanx in advance!
Ps! How the he'll do u keep ur turn signals on all the time or did u put the signal on?
Ps! How the he'll do u keep ur turn signals on all the time or did u put the signal on?
Last edited by Sergio8A; 09-22-2008 at 02:15 PM.