Shift Knobs Comparison: Stock, Evo-R, Forged Performance
#1
Registered User
Thread Starter
iTrader: (40)
Join Date: Jul 2007
Location: Fairborn, OH
Posts: 976
Likes: 0
Received 0 Likes
on
0 Posts
Shift ***** Comparison: Stock, Evo-R, Forged Performance
The 1st **** I replaced was the Evo-R. I had it for about 6 months or so. I loved the Ti-finish. Liked the way it felt more precise. It feels only slightly heavier than stock. But eventually I needed a change. My interior is bone stock so with the Ti-finish stuck out too much. Also I didn't like how sometimes the Home Depot plumbing washer slips out slight out of place between the shift boot and the **** itself.
Today, I received the ***** from Forged Performance. The grip feels a tad bit smaller than Evo-R but I'm sure I'll get used to it. I'm really digging how the **** blends in so well with the interior. Shifting feels 10x more precise than my previous ones (esp. going into reverse). Feels a lot heavier and I'm assuming because of the attached washer that is included on it. Looks like I'll be sticking to this **** for a long long time.
Today, I received the ***** from Forged Performance. The grip feels a tad bit smaller than Evo-R but I'm sure I'll get used to it. I'm really digging how the **** blends in so well with the interior. Shifting feels 10x more precise than my previous ones (esp. going into reverse). Feels a lot heavier and I'm assuming because of the attached washer that is included on it. Looks like I'll be sticking to this **** for a long long time.
Last edited by Doh-Joe; 11-17-2011 at 05:22 PM.
#4
Registered User
Thread Starter
iTrader: (40)
Join Date: Jul 2007
Location: Fairborn, OH
Posts: 976
Likes: 0
Received 0 Likes
on
0 Posts
^ Couldn't agree with you more.
Now that the weather is cooling down, I really can't say at this point but one thing I'm concerned about is how hot the forged **** is going to burn my hand during the summer in Texas. Yes, Evo-R kept my hand nice & crispy during then too.
Now that the weather is cooling down, I really can't say at this point but one thing I'm concerned about is how hot the forged **** is going to burn my hand during the summer in Texas. Yes, Evo-R kept my hand nice & crispy during then too.
Trending Topics
#12
Do WHAAAAT!?
iTrader: (19)
Originally Posted by Jay'Z
The Forged Performance **** has internal cooling fins
#15
Registered User
iTrader: (12)
Join Date: Dec 2004
Location: McAllen / San Antonio TX.
Posts: 2,087
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 35oZephyR
Great choice...I've had mine for awhile, and anything else feels really sloppy.
It just really clicks into the gates and you always know what gear you're in. You can lightly shift with your wrist and let the weight of the **** do the rest.
It just really clicks into the gates and you always know what gear you're in. You can lightly shift with your wrist and let the weight of the **** do the rest.
#16
Registered User
Thread Starter
iTrader: (40)
Join Date: Jul 2007
Location: Fairborn, OH
Posts: 976
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sburke711
I like the FP Shift **** but it appears a little tall/skinny (lanky). Is this an issue or is it not as skinny as it looks?
#18
Administrator
iTrader: (25)
Originally Posted by Hraesvelg
beautiful *****.
I almost went with the Forged ****, then I fell in love with the Tommy K. ****. Forged would definitely be my 2nd choice if I had to get rid of my current ****...