mestisoZ

iTrader: (5)

I know its usually plug and play.. but i think the guy cut the harness.. dont ask.... anyways. ima have to splice the wires together.. but there different color.. heres what im working with

harness from L to R (blue/pink...blue/red...black)



kinda wanna put these on soon.. so any advice would help thanks..

NttnbutaZthang

iTrader: (2)

well the black and black SHOULD be grounds...they usually are...then u just need to find stop and tail connections...you can test these with a meter on your stock harness but the cut harness from the leds wont be possible to test...the only advice i can give you is verify the stop and tail wires on the car then hook the tail wire to either the green or dark green...if u step on your brake and the tail light comes on switch it up...it wont mess the light up but since there seems to be no wiring info available(that i can find) this might be your best bet

mestisoZ

iTrader: (5)

So pretty much who I bought them from is an idiot lol thanks for the info

NttnbutaZthang

iTrader: (2)

well maybe not an idiot but definitely not considertate toward the next person to install them lol...i hope u get them going