kick plate lighting!!
#1
Registered User
Thread Starter
Join Date: Mar 2003
Location: Al Anbar Province, Iraq
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
kick plate lighting!!
hey i made this last night....3 blue l.e.d.s in the "Z" in the door kick plate. they match my blue underdash lighting. used l.e.d.s and rubber grommets. i am going to wire it to my dome light so it comes on when the doors are opened, just like my underdash lights. tell me what you think. more pics to follow.
#6
Registered User
Thread Starter
Join Date: Mar 2003
Location: Al Anbar Province, Iraq
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
they are pretty small leds, the grommet probably makes them look bigger. but, they come with the proper resistor already in line. got it at autozone
Trending Topics
#13
Veteran
iTrader: (2)
I didnt make it, I dont have pics.
personally if I was going to do it, not sure Id use LEDs. they are good light sources, but they project light, and in this case you dont really want to light anything up, but rather make itself light up.
but what if the 3 squares on each side were cut out and this
was placed behind it...
I think that would give it an awesome glow.
personally if I was going to do it, not sure Id use LEDs. they are good light sources, but they project light, and in this case you dont really want to light anything up, but rather make itself light up.
but what if the 3 squares on each side were cut out and this
was placed behind it...
I think that would give it an awesome glow.
#14
Registered User
Thread Starter
Join Date: Mar 2003
Location: Al Anbar Province, Iraq
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
i finished the lights....it looks great! the leds arent even that bright unless you look directly down at them. when i open the door, i have blue underdash with matching blue leds on the Z. it looks nice.
#18
New Member
Originally posted by JDMZ33
I think the LED place on the side 3 squares would look nicer. Seems like 3 LED on the Z emblem is too close together. I would put 3 one one side and 3 on the other side.
I think the LED place on the side 3 squares would look nicer. Seems like 3 LED on the Z emblem is too close together. I would put 3 one one side and 3 on the other side.
still, fresno350, those do look nice with the night shot.
gary
#19
Registered User
Thread Starter
Join Date: Mar 2003
Location: Al Anbar Province, Iraq
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
yeah but i dont use the underdash lights when my orange dash lights are on. only when i open the doors they are rigged to the dome circuit. now the Z is also hooked to the same circuit. ares, the underdash lights were my own thing, i bought 2 10" blue neon tubes and rigged them. i am getting the metal floor mats and i think it will look even better. i thought about doing the squares myself...but you have VERY little clearance under that kick plate. i did the Z because you got some room inside that Z for the leds.